772899
75
Zoom out
Zoom in
Previous page
1/83
Next page
76
Chapter 4 Advanced Functions on Web Management Page
1. Visit http://tplinkwifi.net, and log in with your Kasa account.
2. Go to Advanced > System Tools > System Parameters page to configure the
wireless network 2.4GHz or 5GHz
Beacon Interval: Enter a value between 40 and 1000 in milliseconds to determine
the duration between which beacon packets are broadcasted by the router to
synchronize the wireless network. The default is 100 milliseconds.
RTS Threshold: Enter a value between 1 and 2346 to determine the packet
size of data transmission through the router. By default, the RTS (Request
to Send) Threshold size is 2346. If the packet size is greater than the preset
threshold, the router sends Request to Send frames to a particular receiving
station and negotiates the sending of a data frame, or else the packet will be
sent immediately.
DTIM Interval: Enter a value between 1 and 255 to determine the interval of the
Delivery Traffic Indication Message (DTIM). The default vanlue is 1, indicating
the DTIM Interval is the same as Beacon Interval.
Group Key Update Period: Enter the number of seconds (miimum 30) to control
the time interval for the encryption key automatic renewal. The default is 0,
indicating no key renewal.
WMM Feature: This feature guarantees the packets with high-priority messages
being transmitted preferentially. WMM is enabled compulsively under 802.11n
or 802.11ac mode. It is strongly recommended to enable WMM.
Short GI: This feature is enabled by default and recommended to increase the
data capacity by reducing the Guard Interval (GI) time.
AP Isolation: Select this check box to enable the AP Isolation feature that allows
you to confine and restrict all wireless devices on your network from interacting
with each other, but still able to access the internet. AP isolation is disabled by
default.
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK SR-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK SR-20 in the language / languages: English as an attachment in your email.

The manual is 9.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info