605840
69
Zoom out
Zoom in
Previous page
1/95
Next page
Chapter 6 Wireless Tab
Filtering Rules
There are two filtering policies to control the MAC filtering:
Allow the stations specified by any enabled entries in the list to access.
The stations listed below are allowed to access the wireless network under
the rules. While others are forbidden to access.
Deny the stations specified by any enabled entries in the list to access.
The stations listed below are forbidden to access the wireless network under
the rules. While others are allowed to access.
Wireless Advanced Settings
Distance Settings
E
nter the distance between AP and Station, which will influence the wireless
performance to a great extent. If this device serves as a client, please enter the
distance between this device and the root AP. If this device configured as an AP,
please enter the distance between the farthest client and this AP. The value is
limited to 0-24km.
Beacon Interval
Beacons are transmitted periodically by the device to announce the presence of
a Wireless network for the clients.
Beacon Interval value determines the time
interval of the beacons sent by the device. You can specify a value from 40 to
1,000. The default value is 100.
RTS Threshold
When the RTS threshold is activated, all the stations and APs follow the Request
to Send (RTS) protocol. When the station is to send packets, it will send a RTS to
AP to inform the AP that it will send data. After receiving the RTS, the AP notice
other stations in the same wireless network to delay their transmitting of data.
At the same time, the AP inform the requesting station to send data. The value
range is from 0 to 2346 bytes. The default value is 2346, which means that RTS is
disabled.
Fragmentation Threshold
Specify
the fragmentation threshold for packets. If the size of the packet is larger
than the fragmentation threshold, the packet will be fragmented into several
packets. Too low fragmentation threshold may result
in poor wireless
performance caused by the excessive packets. The recommended and default
value is 2346 bytes.
- 66 -
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK CPE220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK CPE220 in the language / languages: English as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK CPE220

TP-LINK CPE220 Installation Guide - English - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info