605840
68
Zoom out
Zoom in
Previous page
1/95
Next page
Chapter 6 Wireless Tab
3. Set the VLAN ID of wireless network identified by this SSID, and the value
ranges from 1 to 4094.
4. Select whether to broadcast this SSID or not.
5. Enable AP Isolation, the device would isolate the hosts within the same
wireless network. All the hosts cannot communicate with each other. The
default setting is Disable.
SSID
Select the added SSID to configure its security mode.
Security Mode
If all the hosts are allowed to access the wireless network, please select None.
For the safety of wireless network, you are suggested to encrypt your wireless
network. This device provides three security modes: WPA-PSK (Pre-Shared Key),
WPA (Wi-Fi Protected Access) and WEP (Wired Equivalent Privacy). WPA-PSK is
recommended. Please refer to Security Mode
in the Wireless AP Settings section
for further information.
Wireless MAC Filtering
Wireless MAC Filtering function uses MAC addresses to determine whether one host can access the
wireless network or not. Thereby it can effectively control the user access in the wireless network. This
function is available in all modes except the client mode.
Wireless MAC Filtering Check the Enable box to use wireless MAC filtering function.
1. Click Add in the table of wireless MAC filtering.
2. Select the wireless network (SSID) that you need to filter. In AP mode, if
Multi-SSID is enabled, you should
set different filtering rules for each
SSID.
3. Enter the MAC address of the wireless host that you need to filter.
4. Enter the description information of this filtering rule in the Comment
filed.
- 65 -
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK CPE220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK CPE220 in the language / languages: English as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK CPE220

TP-LINK CPE220 Installation Guide - English - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info