458429
48
Zoom out
Zoom in
Previous page
1/70
Next page
TWO THREAD OVERLOCK
1. Open the front cover.
2. Use one needle thread (left or right
needle) and lower looper thread.
3. Turn the handwheel toward you to
move the upper looper to the right
side of the needle.
4. Hold the by hand and gently push
it down.
Warning:
Pushing converter down too hard may
bend converter.
Page 44
English Español
Section
5
REMALLADO DE DOS HILOS
1. Abra la tapa frontal.
2. Utilice el hilo de una aguja (izquieda o
derecha) y el hilo del áncora inferior.
3. Gire el volante hacia usted para
mover el áncora superior hacia la
derecha de la aguja.
4. Sujete el con la mano y empuje
ligeramente hacia abajo.
¡Atención!
Si empuja el convertidor hacia abajo
demasiado fuerte puede doblarlo.
5. Insert the tip of the 2-thread
converter into the eye of the upper
looper.
6. Close the front cover.
5. Inserte la punta del convertidor en
el ojo del áncora superior.
6. Cierre la tapa frontal.
Para remallado con 3 y 4 hilos, coloque
el conversor de 2 hilos en posición alta
como se muestra, quitando el extremo
del ojo de la aguja del áncora
superior.
For 3-thread/4-thread overlock sewing,
set 2-thread overlock converter in the
up position as illustrated, by removing
the tip out of the eye of the upper
looper.
2
1
3
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toyota SL3487 (SL1T-X serie) at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toyota SL3487 (SL1T-X serie) in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info