Manual Toyota Quilt60 (page 30 of 79) (English, Dutch, French, Italian)

458423

Zoom out

Zoom in

1/79

English Français

Straight stitching

Starting to sew (fig A)

❈ Hold the threads for the first few stitches to avoid

knotting on the under surface.

3. Raise the needle to its highest position, and lift the

presser foot lever.

4. Place fabric under the presser foot. Lower presser foot.

5. Press the foot controller lightly and sew forward,

guiding the fabric by hand as it is fed. Do not push

or pull the material.

Turn a square corner (fig B)

To change sewing direction.

1. Stop the machine at the point you want to change

sewing directions, with the needle in the fabric.

2. Raise the presser foot, turn the fabric to its new direction.

3. Lower the presser foot and begin sewing in the new

direction.

Reverse sewing (fig C)

To reinforce seam, it is recommended to start or end

with a few stitches in reverse sewing.

Push the reverse lever to sew reverse. Guide the

fabric as it is fed. Do not pull the material.

For reinforcment, a few stitches are enough.

Release lever to return to forward sewing.

Finishing sewing (fig D)

1. Stop pressing the foot controller. Turn the

handwheel until the needle is at its highest

position. Raise presser foot.

2. Draw out the fabric to the left. (fig D-1)

3. Cut threads with the cutter. (fig D-2)

4. Leave 15 cm of thread clear behind to prevent the

thread from drawing out of the needle eye.

(fig D-3)

Points droits

Commencer à coudre (fig. A)

❈ Tenir les fils des quelques premiers points pour

éviter de coudre sur l'envers.

3. Lever l’aiguille à sa position la plus haute, et lever

le levier presseur de pied-de-biche.

4. Placer le tissu sous le pied-de-biche. Abaisser le

pied-de-biche.

5. Presser doucement sur la pédale et coudre en

avant, en guidant le tissu avec les mains pour

alimenter la machine. Evitez de pousser ou de tirer

le tissu.

Changement de direction de couture (fig. B)

Coudre en changeant de directions.

1. Arrêter la machine au point où vous voulez

changer de direction, avec l’aiguille dans le tissu.

2. Levez le pied-de-biche, tourner le tissu vers sa

nouvelle direction.

3. Abaissez le pied-de-biche et commencez à coudre

dans la nouvelle direction.

Coudre en marche arrière (fig. C)

Pour renforcer la couture, il est recommandé de

commencer ou de terminer avec quelques points

cousus en marche arrière.

Pousser le levier de marche arrière pour coudre en

marche arrière. Guider le tissu lorsqu’il alimente la

machine. Eviter de tirer sur le tissu.

Pour renforcer une couture, plusieurs points sont

nécessaires.

Relâcher le levier de marche arrière pour revenir au

mode de couture vers l’avant.

Pour terminer la couture (fig. D)

1. Arrêter de presser la pédale. Tournez le volant

jusqu’à ce que l’aiguille se retrouve à sa position

la plus haute. Lever le pied-de-biche.

2. Retirer le tissu par la gauche. (fig. D-1)

3. Couper les fils avec le coupe-fil. (fig. D-2)

4. Laisser 15 cm de fil libre derrière afin de

l’empêcher de sortir du chas de l’aiguille. (fig. D-3)

Quilt60_EFNI.book Page 19 Tuesday, July 12, 2005 8:01 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toyota Quilt60 in the language / languages: English, Dutch, French, Italian as an attachment in your email.

The manual is 4,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toyota Quilt60

Toyota Quilt60 User Manual - German - 40 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Toyota Quilt60 Manual

Product: