Manual Toyota QUILT 226 (page 26 of 77) (English, Dutch, French, Italian)

603738

26

Zoom out

Zoom in

Previous page

1/77

Next page

15

English Français

How to use needle threader

(When the machine is equiped with a needle

threader.)

The needle threader can be used to thread the

needle more easily.

1. Thread the machine to the needle guide

➄ as

refered on page 14. (fig A)

2. Lower presser foot lever. (fig B)

3. Bring the needle to its highest position by

rotating the handwheel towards you.

4. Lower Needle threader lever

➅. Hook Thread to

guide

➆ from the left side to the right. (fig C)

5. Lower needle thread lever to its lowest position

so the hook passes through the needle eye.

Bring thread from guide

➆ to the right side

under the hook

➇. (fig D)

6. Take the thread under hook guide

➈, and bring

it up to the right, pressing the thread against the

needle. (fig E)

7. Slightly release the needle threader lever

➅ and

thread the needle eye. (fig F-1)

The thread is pulled by the hook and passes

through the eye.

8. When the thread passed the needle eye,

release the thread, and fully release the needle

thread lever.

(fig F-2)

NOTE

Repeat the above steps when the thread

does not pass through the needle eye.

Needle threader does not work correctly

when needle is set uncorrectly.

9. Pull out a loop of thread through needle eye.

(fig G)

Comment utiliser un enfile-aiguille

(Lorsque la machine est équipée d’un enfile-

aiguille.)

L’enfile-aiguille peut être utilisé pour enfiler

l’aiguille plus facilement.

1. Enfiler la machine par l’enfile-aiguille

➄ comme

indiqué à la page 14. (fig. A)

2. Abaisser le levier presseur de pied-de-biche.

(fig. B)

3. Placer l’aiguille à sa position la plus haute en

tournant le volant vers vous.

4. Abaisser le levier du fil d’aiguille

➅. Faire un

crochet par le guide

➆ de la gauche vers la

droite. (fig. C)

5. Abaisser le levier du fil d’aiguille jusqu’à sa

position la plus basse pour que le crochet

passe à travers le chas de l’aiguille.

Enlever le fil du guide

➆ du côté droit et

passer-le en dessous du crochet

➇. (fig. D)

6. Prenez le fil en dessous du guide du crochet

➈,

et ramener-le vers le haut à droite en pressant

le fil contre l’aiguille. (fig. E)

7. Lâcher légèrement le levier du fil d’aiguille

➅ et

le fil en même temps. (fig. F-1)

Le fil est tiré par le crochet et passe à travers le

chas de l’aiguille.

8. Lorsque le fil est passé par le chas de l’aiguille,

lâcher le fil et le levier du fil d’aiguille.

(fig. F-2)

Répétez les étapes ci-dessus si le fil ne

passe pas correctement à travers le chas de

l’aiguille. L’enfile-aiguille ne fonctionne pas

lorsque l’aiguille est mal positionnée.

9. Tirez sur la boucle du fil se trouvant dans le

chas de l’aiguille. (fig. G)

➅

➆

➇

➆

➈

Max 15W

➄

BA C

D E

1

Can you purchase a ruler foot for this machine and does the machine have a long or short shank Submitted on 7-5-2020 at 03:20
Reply Report abuse
My stitch selector will only now do zigzag no matter what I do. It will not click and just goes round. I have taken the selector case off and have noticed a crack in the case shaft/shank. Is it possible to get a replacement? Submitted on 29-7-2018 at 17:16
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Toyota QUILT 226 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toyota QUILT 226 in the language / languages: English, Dutch, French, Italian as an attachment in your email.

The manual is 2,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toyota QUILT 226

Toyota QUILT 226 User Manual - German - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info