458396
73
Zoom out
Zoom in
Previous page
1/115
Next page
Deutsch
Nederlands
Italiano
58
AB
2. • Drehen Sie das Handrad, bis
sich die Nadel nach rechts
bewegt. Legen Sie das Gewebe
so ein, damit die Nadel am
äußersten Rand der Kante
einsticht.
Absenken der Nadel.
• Senken Sie den Füßchenheber
und beginnen mit dem Nähen.
Wenn Sie den Versäuberungsfuß
verwenden, stellen Sie sicher, dass
die Fußführung die rechte
Stoffkante passiert.
Applikation
A. • Zeichnen Sie für die
Applikation ein Design auf das
Material und schneiden es aus.
• Legen Sie die Applikation auf
das Grundmaterial und heften
oder stecken es fest.
B. Nähen Sie mit Zickzack-Stichen
an den Kanten der Applikation
herum.
Verwenden Sie entsprechend
Form und Größe der Applikation
und des Materials Stichbreite "3"
oder "4" und Stichlänge zwischen
"0,5" und "2".
Bei Richtungsänderung an
Ecken oder zum Nähen sehr
kleiner Kreise die Maschine
stoppen. Die Nadel muss dabei
außerhalb der Kante stecken.
Heben Sie den Füßchenheber an
und drehen das Material.
2. • Draai aan het handwiel tot de
naald naar rechts beweegt. Leg
de stof zo onder de voet, dat de
naald juist naast de rand steekt.
• Zet de naald omlaag.
• Zet de persvoethefboom
omlaag en begin te naaien.
Let erop dat alle steken aan de
voorzijde gelijk komen met de rand
van de stof wanneer u de festonvoet
gebruikt.
Applicatiewerk
A. • Teken een figuur op het
materiaal voor het oplegwerk en
knip ze uit.
• Plaats de uitgesneden figuur op
de stof en naai ze los aaneen of
speld de figuur vast.
B. Maak een zigzagsteek rond de
figuur.
Stel de steekbreedte in op "3" of
"4" en de steeklengte tussen "0,
5" en "2", naargelang de vorm,
het formaat en het materiaal van
de figuur.
Om bij een hoek van richting te
veranderen of om kleine
kringetjes te maken, zet u de
machine stil met de naald buiten
de rand van de figuur, zet u de
persvoethefboom omhoog en
draait u de stof.
2. • Ruotare il volantino finché l'ago
non si sposta verso destra.
Posizionare il tessuto in modo
tale che l'ago buchi appena
all'esterno del bordo.
Abbassare l'ago.
Abbassare la leva alzapiedino
premistoffa e iniziare a cucire.
Quando si utilizza il piedino per
sopraggitto, cucire in modo che la
guida del piedino segua il bordo
destro del tessuto.
Cucitura di inserti
A. • Tracciare la sagoma dell'inserto
desiderato sul materiale, e
ritagliarla.
• Posizionare l'inserto sul tessuto
della base ed imbastirlo o
puntarlo con gli spilli.
B. Eseguire una cucitura lungo il
bordo dell'inserto ritagliato con il
punto a zig-zag.
Utilizzare una larghezza punto "3"
oppure "4" e una lunghezza
compresa tra "0.5" e "2", a
seconda della forma e della
dimensione dell'inserto ritagliato
e del tipo di materiale.
Per cambiare direzione in
corrispondenza di un angolo, o
per cucire cerchi particolarmente
piccoli, arrestare la macchina con
la foratura dell'ago all'esterno del
bordo, alzare la leva del piedino
premistoffa e girare il materiale.
P49-60 2006.08.04, 09:26Page 11 Adobe PageMaker 6.5C/PPC
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toyota Ezone at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toyota Ezone in the language / languages: English, German, Dutch, French, Italian, Spanish, Spanish as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info