603717
92
Zoom out
Zoom in
Previous page
1/115
Next page
English
77
Error messages and beep sounds
The sewing advisor LCD displays error messages when the machine is not operated correctly.
When the following messages are displayed, correct the problems by following solutions.
Flashing
display
with beep
sounds)
Flashing
display
No beep
sound.
Solution
Possible
cause
Solution
Possible
cause
Solution
Possible
cause
Solution
Possible
cause
Solution
Possible
cause
Solution
Possible
cause
Solution
Possible
cause
Lower the presser for lifter.
The start and stop button (or reverse stitch lever ) was
pressed when the presser foot lifter is UP.
Pull down the buttonhole lever and push it to the back
until it clicks.
The start and stop button was pressed when the button-
hole stitch (Stitch No.1) is selected, and with the button-
hole lever UP.
Return the buttonhole lever up.
The start and stop button was pressed when the button-
hole stitch (Stitch No.1) is NOT selected, with the button-
hole lever DOWN.
Move the bobbin winder shaft to the right.
The bobbin winder shaft returned to the left when winding
the bobbin.
1 Connect the foot controller plugs correctly.
2 Do not press the start and stop button when the ma-
chine is connected to a foot controller.
1 The foot controller has been disconnected during the
sewing.
2 The start and stop button was pressed when the foot
controller is connected to the sewing machine.
Set proper stitch length
1 Stitch width is not set at "4" when stretch stitches (Stitch
No.11-20) are selected.
2 Stitch width is set to "4" when Stitch No.1 or stitch No.
13-10 are selected.
Set proper stitch width (except "0")
Stitch width is set to "0" when the stitch patterns selected
are NOT straight stitch (Stitch No.2) nor straight stretch
stitch (Stitch No.12) .
Error message
Possible cause and solution
P73-82 2006.08.04, 09:01Page 6 Adobe PageMaker 6.5C/PPC
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toyota EZ800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toyota EZ800 in the language / languages: English, German, Dutch, French, Italian, Spanish, Spanish as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info