671167
9
Zoom out
Zoom in
Previous page
1/16
Next page
Safety and Instruction Manual
9
Helpline: +44 (0) 333 220 6066
6. Place the sharp edge of the scissors
upwards, and slowly move the edge along
the incline of the guide. Carefully draw the
scissors along the edge when they make
contact with the grinding wheel.
7. Repeat the sharpening process 3-4 times.
To sharpen the right edge of the knife blade,
use the
Note: Only a small amount of pressure is
required for best results.
8. Adjust the angle between the scissors and
the incline of the guide according to the
thickness and size of the scissors.
9. Sharpening the other scissors blade the
same way.
10. Once you have nished sharpening the
scissors, press the On/Off switch to the
‘0’ position to turn off the knife sharpener.
Unplug from the mains and press the auto
retractable cord button to wind the cord for
storage.
SharpeningScrewdrivers:
Flatheadscrewdriversonly.
1. Place the knife sharpener on a at and
stable surface.
2. Insert the plug into a mains power outlet.
3. Press the On/Off switch to the ‘I’ position to
turn on the knife sharpener.
4. With one hand holding the handle of the
screw driver, hold the knife sharpener rmly
for extra stability.
5. Insert the head of the screwdriver into the
screwdriver slot until it makes contact with
the grinding wheel.
6. Repeat on both sides of the head.
7. Once you have nished sharpening the
screwdriver, press the On/Off switch to the
‘0’ position to turn off the knife sharpener.
Unplug from the mains and press the auto
retractable cord button to wind the cord for
storage.
RestTimes:
Do not use the knife sharpener for more than 3
minutes at a time.
After 3 minutes of continuous use, the knife
sharpener must be rested for 20 minutes before
next use.
GrindingWheel:
The grinding wheel may produce some sparks
during use. This is normal.
If the scissors, knife or screwdriver blocks
the grinding wheel during use, or the grinding
wheel does not turn, remove the object to
be sharpened from the guide. Turn the knife
sharpener off and do not use for at least 20
minutes.
Failure to do so may result in damage to the
appliance.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tower T19008 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tower T19008 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info