671194
15
Zoom out
Zoom in
Previous page
1/20
Next page
Safety and Instruction Manual
15
Helpline: +44 (0) 844 984 0055
4TROUBLESHOOTING&FAQ’S
Questions Answers
Can I operate the
grinder empty?
No. Running the grinder dry could damage the head.
Are any of the parts
and accessories
dishwasher safe?
No. We recommend cleaning all the accessories in warm soapy water so as not
to damage the nish.
Where can I buy
sausage casings?
You can purchase natural casings from your local butcher, or look online on
sausage making websites for a variety of natural and synthetic casings.
How can I clean
excess meat out of the
grinder?
Feed chunks of stale bread or toast through the grinder. This helps to clear the
last pieces of ground meat out.
What do I do if my
grinder gets jammed?
If your grinder is jammed, or if the motor slows or stops you need to switch it to
the reverse position. To do this, switch the grinder off.
Move ON/OFF/REV switch to the REV position, and turn the grinder back on.
This will reverse the ow of the product. The worm will begin rotating in the
opposite direction, thus empting the horn of the grinder.
Can I add food to
my grinder before
switching it on?
No. The grinder must always be switched on before adding any food.
Meat does not ow
through the grinder.
Make sure the grinder head is properly assembled.
What are the sizes of
the cutting blades?
Fine: 3mm
Medium: 5mm
Coarse: 7 mm
Meat is not feeding
through correctly
Check that the cutting blade is assembled correctly. Ensure the meat is boneless
and sinewless.
Check that the food pipe is full of meat. Air pockets inside can result in an
inconsistent nished product.
Check the extruder ring and screw assembly are correctly in place.
If you continue to have problems, run the meat through the grinder suing the
coarse cutting blade rst, and then use the medium or ne blade afterwards.
White meat is more difcult to grind that red meat (red meats mince easier).
Ensure any white meat is diced into small portions before grinding.
What is the best way
to clean the cutting
blades?
Wash them in warm soapy water. Never store them wet. If they are not being
used immediately after washing, wipe them with mineral oil.
Always inspect the blades regularly to ensure that all the holes are clear of
bones, bits of gristle or over foreign materials. Clean the holes with wire as often
as possible.
How long can I operate
the grinder for?
Do not operate the grinder for more than 30 minutes at any one time. After 30
minutes of continuous use, allow a few minutes to rest before using again.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tower T19005 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tower T19005 in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info