671131
9
Zoom out
Zoom in
Previous page
1/28
Next page
Safety and Instruction Manual
9
Helpline: +44 (0) 333 220 6066
Fittingthesmokingrack:
The smoking rack comprises of ve pieces –
the tier, the plated shelf and three rack shelves.
1. First, attach the plated shelf, with the plate
facing towards you.
2. To attach the shelf hook it over the front
hooks on the tier, and under the back
hook.
3. Attach the required amount of rack
shelving following the above process.
4. Place your food onto the shelves.
5. Position the tier into the smoke pot, with
the plate sitting on top of the wood chip
pot.
FittingtheDigitalPressureCooker&
Smoker lid:
1. To t the lid, place on to base unit and
twist the handle to t into in place.
2. Ensure that the safety release pin (on
the rear of the lid) and the condensation
pot are aligned on the back of the Digital
Pressure Cooker & Smoker base.
Functionality:
Connect power lead to the cooking pot, and
switch on at the wall.
Attach your transparent water catch pot to
the back of the unit, this will catch any excess
water from around the rim whilst cooking.
Continually press the menu button on the
control panel to select the required cooking
process. This will display the cooking time
for that function, if you wish to increase or
decrease your cooking time for the required
function, you can do this by pressing the Hours
and Minutes buttons, this will then increase or
decrease your cooking time in minutes.
Once you have selected your function, press
the start button, this will then go into warming
up mode, once the Digital Pressure Cooker &
Smoker has reached the set temperature the
cooking time will start.
If you wish to pre-set the Digital Pressure
Cooker & Smoker as to delay the start time,
you can do this once you have selected your
cooking function, now press the pre-set button,
then add time in hours or minutes by pressing
the Hour and Minute buttons, now press
Start, once the delay time has completed, the
warm up process will begin then your selected
cooking function will commence.
After your cooking process has nished the
cooker will automatically go into the keep warm
function. The cooker will stay at between 65-
70°C, if it goes over 70°C it will stop heating, if
it falls below 65°C it will start to heat back up
to 70°C.
To add ingredients to the Digital Pressure
Cooker & Smoker during cooking you must rst
de-pressurise the cooker by turning the steam
release valve.
Open the lid to the Digital Pressure Cooker
& Smoker and add your extra ingredients. To
replace the lid pull out the safety lock override
pin to disable the pressure lock. Once the lid is
securely in position the safety lock override pin
will spring back into place.
Select you cooking function once again and
adjust to the remaining time.
9


Need help? Post your question in this forum.

Forumrules
1

Forum

tower-t16008

Reset search

  • Hello, my wee device needs help . Display shows 0000. Buttons not working . Where is the thermal fuse please ? Submitted on 14-5-2021 at 17:10

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tower T16008 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tower T16008 in the language / languages: English as an attachment in your email.

The manual is 3,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info