Manual Tower T16008 (page 8 of 28) (English)

671131

Zoom out

Zoom in

1/28

3 USING YOUR APPLIANCE

Digital Pressure Cooker & Smoker

Before using the unit for the rst time, carefully

clean the unit and all the items that will come

into contact with food.

Do not use any abrasive detergents, brushes

with metal or nylon bristles or sharp objects

such as knives or spatulas for cleaning the

appliance and accessories, use a sponge or

cloth dampened in warm water to avoid any

damage.

Clip the plastic condensation pot (water catch

pot) onto its corresponding mount on the rim of

the rear of the Digital Pressure Cooker & Smoker.

Remove the lid by twisting the handle anti-

clockwise.

Pressurecooking:

1. Place your Digital Pressure Cooker &

Smoker on a stable, heat resistant surface.

2. Connect power lead to the base of the

Digital Pressure Cooker & Smoker and

plug in at the wall.

3. Take the cook pot and t it into the base of

the Digital Pressure Cooker & Smoker.

4. Following recipe/cooking instructions add

water and food to the cook pot, using the

steamer tray if required.

5. To t the lid, place on to base unit and

twist the handle to t into in place. Ensure

that the safety release pin (on the rear

of the lid) and the condensation pot are

aligned on the back of the Digital Pressure

Cooker & Smoker base.

6. Select the required cooking function on

the control panel.

7. Once cooking has nished, turn the steam

release valve to release pressure. Once

the pressure has dropped, the safety

valve located on the rear of the lid will

release.

8. Turn the handle anti-clockwise to remove

the lid.

Smoking:

1. Place your Digital Pressure Cooker &

Smoker on a stable, heat resistant surface.

2. Connect power lead to the base of the

Digital Pressure Cooker & Smoker and

plug in at the wall.

3. Take the smoke pot (pot with heating

element bar) and t it into the base of your

Digital Pressure Cooker & Smoker.

4. To t the smoke pot, angle it towards the

user and align the red arrow on the rim of

the pot with the red dot on the rim of the

Digital Pressure Cooker & Smoker and

slide into place.

Note: If the Smoke Pot will not t into the Digital

Pressure Cooker & Smoker base, ensure that

you are angling it at a forward tilt.

5. Once the smoke pot has been correctly

angled and the red indicators are aligned,

the smoke pot will t easily into place.

6. Fill the small wood chip pot with 3 - 4

wood chips.

7. Attach the lid onto the wood chip pot.

8. The wood chip pot has two large holes on

the side, one square and one round. Slide

the wood chip pot onto the heating bar in

the smoke pot, square hole rst. Ensure

that the wood chip pot is tted so that

the heating bar passes fully through both

holes. Slide the wood chip pot as far along

as it will go, so that it is seated near the

inner walls of the smoke pot.

9. Your Digital Pressure Cooker & Smoker is

now ready for use.

Note: Always add water when hot smoking,

pressure cooking or steaming foods. Do not

add any water when cold smoking.

Hello, my wee device needs help . Display shows 0000. Buttons not working . Where is the thermal fuse please ? Submitted on 14-5-2021 at 17:10
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tower T16008 in the language / languages: English as an attachment in your email.

The manual is 3,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tower T16008 Manual

Product: