671116
8
Zoom out
Zoom in
Previous page
1/16
Next page
8
Register online at www.towerhousewares.co.uk for your FREE extended guarantee.
3USINGYOURAPPLIANCE
Assembly:
CAUTION: Do not plug the product into an
electrical outlet until it is fully assembled.
Before using the product for the rst time,
disassemble and wash as follows:
1. Unscrew the blade assembly from the cup
and carefully remove the gasket from its
groove.
CAUTION: Handle blades carefully, as they are
sharp.
2. Wash all parts except the base and power
cord in warm, soapy water or place them
in the top rack of an automatic dishwasher,
then rinse and dry thoroughly.
WARNING: Do not immerse the base or power
cord in water or other liquids.
NOTE: Do not use abrasive cleaners to clean
any part of the product.
3. Insert the gasket into the groove in the
blade assembly and securely retighten
the blade assembly onto the top of the
cup. Note that the lip of the gasket faces
upward.
NOTE: When inserting the gasket into the
groove, press the gasket rmly around all sides
and test it by turning the blade assembly upside
down to make sure the gasket is not loose or
does not fall out. There will be a small bump
underneath the gasket where the safety interlock
mechanism protrudes; this is normal.
4. Place the base on a at, level, stable
surface. To attach the cup assembly (with
the cup and the blade assembly securely
attached together), align the
symbol on
the bottom edge of the blade assembly with
the
mark on the base and turn clockwise
until it is rmly in place, aligned with the
symbol.
Usingyourappliance:
1. Ensure the power cord is unplugged from
the electrical outlet, then remove the cup
assembly from the base and unscrew the
blade assembly.
2. Pour any liquid ingredients into your
Personal Blender cup rst, to help lubricate
the blades. Cut all solid ingredients into
small pieces.
3. Ensure the gasket is securely seated in the
blade assembly, and then securely tighten
the blade assembly clockwise onto the top
of the cup.
4. To attach the cup to the Personal Blender
base, align the
symbol on the bottom
edge of the blade assembly with the
mark on the base and turn clockwise until it
is rmly in place, aligned with the
symbol.
NOTE: Product will not operate and ready light
will not illuminate unless both the cup and blade
assembly are attached properly to the base.
5. Plug in your Personal Blender. The power
indicating light will illuminate.
6. Press the power button to start blending.
NOTE: If the blades are not operating smoothly,
stop the product and add some liquid, or reduce
the solid contents in the cup.
7. Press the power button again to shut the
blender off.
8. When the blades have stopped, unplug
the power cord from the electrical outlet,
remove the cup from the base, and turn the
cup right-side up.
9. Unscrew the blade assembly from the cup
and empty the contents into a separate
container or screw a drinking lid onto your
cup to enjoy your smoothie on the go!
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tower T12024 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tower T12024 in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info