Manual Toshiba TDP-TW95 (page 26 of 46) (English)

485632

Zoom out

Zoom in

1/46

Operations

Setting up the wireless LAN (Continued)

<SSID>

This is an ID code for connecting to specific individuals over a wireless LAN. This may

also be called “Network group” or “Network name”. Please read the following carefully.

Note 1: The SSID is set to TDPJ when shipped from the factory. If you leave this

setting as it is, security may be compromised due to access by a third party

using the “Wireless Utility” within the projector’s possible communication area.

Before using the projector, therefore, be sure to set SSID to a character string

different from the default.

Note 2: When you use the Ad hoc communication mode, if there is a similar SSID

network group (for example TDPJ, TDPJ1, TDPJ2, etc.) in the possible

communication area, it is possible that your projector name will not be dis-

played in the Wireless Utility projector list column. If this is the case, set SSID

to a completely different character string.

Enable or disable encryption for security purposes.

Note: Encryption is factory-set to Off. If you use the projector with this setting left

unchanged, security may be compromised due to access by a third party using

the Wireless Utility within the projector’s coverage. Before using the projector,

therefore, be sure to set Encryption to On.

When you have set Encryption to On, the authentication method for wireless LAN

must be set. By default, Open is selected. Select a method identical to that of the

wireless LAN terminal to be connected with.

When you have set Encryption to On, Key index must be set. By default, “1” is

selected. Select a key index identical to that of the wireless LAN terminal to be

connected with.

Note: Since the range of key index varies by product type (1 to 4 or 0 to 3), make

settings with attention.

When you have set Encryption to On, the WEP key must be set. For use at an

encryption level of 64-bit, specify a string of 5 arbitrary characters or a string of ten

characters in hexadecimal notation. For use at the 128-bit level, specify a string of 13

arbitrary characters or a string of 26 characters in hexadecimal notation.

Note: Alphabetic characters (A to F, a to f) used in hexadecimal notation are case

insensitive; the uppercase characters and their lowercase equivalents are

handled to be identical.

The higher the number of bits, the stronger the encryption, and hence the harder it will

be for a third party to decipher your communications. However, setting higher encryp-

tion levels may slow down communication speed. To set the highest security level,

specify a 128-bit WEP key. For higher security, avoid using a word found in a dictionary

and change the key sometimes.

Set the following item if you have set the communication mode to Infrastructure.

● Character entry

Enter characters using numeric keys of the remote control.

Character entry mode

Remote

control

button

Items using characters, numbers, and symbols

(e.g., projector name and destination address)

Number only

“1” “.” “@” “-” “_”

“2” “A” “B” “C” “a” “b” “c”

“3” “D” “E” “F” “d” “e” “f”

“4” “G” “H” “I” “g” “h” “i”

“5” “J” “K” “L” “j” “k” “l”

“6” “M” “N” “O” “m” “n” “o”

“7” “P” “Q” “R” “S” “p” “q” “r” “s”

“8” “T” “U” “V” “t” “u” “v”

“9” “W” “X” “Y” “Z” “w” “x” “y” “z”

“0” “space!"#$%&'()*+,-./:;<=>?@[＼]^_`{｜}~”

Deletes one character.

“1”

“2”

“3”

“4”

“5”

“6”

“7”

“8”

“9”

“0”

Deletes one character.

● Details on individual items

• [Easy Connect (USB memory)]

This feature allows users to easily connect the projector to a computer over wireless

networks, without making Network settings via Wireless Utility.

• [Network settings]

<Mode>

Your projector is set to Ad hoc in the factory. Change the setting if you want to use the

projector in Infrastructure mode.

When you have set Mode to Ad hoc, Standards must be set. The Standards is set to

IEEE802.11g when purchased, and may not work normally depending on the wireless

LAN terminal to be connected with. In that case, change the Standards to

IEEE802.11b.

Usually, you do not have to set this item. If a network group having the same SSID

already exists in the projector’s coverage, the channel is changed automatically to the

channel of that network group.

Note 1: If a set channel is in bad connections for wireless connection, try the other

channels to avoid the effects of radio waves to select the one in possibly the

best communication conditions.

Note 2: To communicate in Ad hoc mode with a computer that cannot change the

channel, start up the projector before the computer.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TDP-TW95 in the language / languages: English as an attachment in your email.

The manual is 8,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Toshiba TDP-TW95 Manual

Product: