485632
25
Zoom out
Zoom in
Previous page
1/46
Next page
49
Operations
48
Setting up the wireless LAN (Continued)
Setting Wireless Utility
If you select Wireless Utility, the following items can be set.
[Yes No] [Enter: ]
Mode: Ad hoc Infrastructure
Standards: IEEE802.11b IEEE802.11g
Channel: Select a number (1 to 11) using the buttons.
SSID: Specify a desired character string (1 to 32 characters).
[ : Move left or right one character.] [ to : Set a character.]
Encryption: On Off
Network authentication: Open Shared
Key index: Select a desired number (1 to 4) set by .
WEP key: Specify a desired character string.
(5 to 13 characters, or 10 to 26 digits in hexadecimal notation)
[ : Move left or right one character.] [ to : Set a character.]
DHCP: Use Not use
IP address: Enter using the numeric keys of the remote control.
[ : Move left or right one character.] [ to : Set a character.]
Subnet mask: Enter using the numeric keys of the remote control.
[ : Move left or right one character.] [ to : Set a character.]
Gateway: Enter using the numeric keys of the remote control.
[ : Move left or right one character.] [ to : Set a character.]
Confirm: [OK] [Cancel] [Enter: ]
Reset all the network settings.
Confirm: [Yes] [No] [Enter: ]
Specify a desired character string (0 to 8 characters).
[ or : Enter setting mode.] [ : Select item.] [ : Move left or right one
character.] [ to : Set a character.]
Confirm: [OK] [Cancel] [Enter: ]
Specify whether to allow the remote control of the projector from a computer.
Allowed Presentation Forbidden
Allowed: The projector always accepts remote commands from a computer.
Presentation: Accepts only the remote commands from the computer whose screen is
currently displayed via the projector (Update automatically) using Wireless
Utility.
Forbidden: Always ignores any remote commands from a computer.
Browser authentication: Switch on/off the password authentication for access to the
setting screen using the Projector Configuration Tool.
Password: Enter the password used to access the setting screen when the Browser
authentication is set to On. A character string (1 to 8 characters) can be specified as
desired.
[ : Move left or right one character.] [ to : Set a character.]
Confirm: [OK] [Cancel] [Enter: ]
DescriptionItem
Easy Connect
(USB memory)
Network settings
Setting
initialization
Projector
name
Remote
control
WEB browser
On Off
*To enter characters, use the numeric keypad on the remote control.
Setup using the Setting display (2)
Projector settings (Be sure to read this subsection.)
Using the factory settings as-is may suffer security damage, so be sure to
change the projector settings.
1. Press the MENU button twice
2. Select a Category
3. Make settings
Select a category by using
.
The following four categories
are available:
Displays the current settings
of selected category.
Item shown in gray cannot
be set with the currently set
conditions of the projector.
p.49
Wireless utility
setup
p.55
Slide Show setup
Status display
p.61
The figure shows a typical example. As the display may differ depending on the
item, use the following pages as a reference.
While the video file transfer function of wireless utility is in use, the background
image of the Setting display (2) does not appear.
Item
The Setting display (2) is displayed.
* Appears only when Wireless/USB input is selected.
These marks signify the items can be
selected from the list by using .
After an item is selected, apply it by
pressing .
Press or to open the menu.
4. Back RETURN button
5. End Press the MENU button or RETURN button.
(The menu disappears 30 seconds after the last operation.)
Control setting
p.60
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TDP-TW95 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TDP-TW95 in the language / languages: English as an attachment in your email.

The manual is 8,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info