214450
25
Zoom out
Zoom in
Previous page
1/47
Next page
49
Operations
48
Using the menus (Continued)
Displaying Information (Status display)
This displays information about the input signal, lamp use time, LAN connection status,
etc.
“Yes”: displayed, “No”: not displayed
Item Description
Computer
Y/PB/PR
Video
Wireless/
USB
S-video Card
memory
Projector
Input Input source name Yes Yes Yes Yes Yes
Mode name RGB input mode
[Note 1]
Ye s N o N oNoNo
Resolution Resolution (in dots) Yes No No No No
Frequency Sync frequency Yes No No No No
Sync Sync signal polarity
[Note 2]
Ye s N o N oNoNo
Signal format Y/P
B
/P
R
signal format No Yes No No No
Video mode Color method of video signal No No Yes No No
Lamp time Time of lamp use
[Note 3]
Ye s Ye s Ye sYesYes
Lamp reset count The count for lamp replacement Yes Yes Yes Yes Yes
Total time The total time that this projector is
used.
Ye s Ye s Ye sYesYes
Version Firmware version
[Note 4]
Ye s Ye s Ye sYesYes
Wired LAN
Connection status Displays connection status of LAN. Yes Yes Yes Yes Yes
IP address Displays the IP address. Yes Yes Yes Yes Yes
Subnet mask Displays numeric value of subnet
mask.
Ye s Ye s Ye sYesYes
Gateway Displays numeric value of gateway. Yes Yes Yes Yes Yes
MAC address Displays MAC address of the
projector.
[Note 5]
Ye s Ye s Ye sYesYes
PJLink class PJLink version Yes Yes Yes Yes Yes
Notes
1: The mode of supported RGB signals
p.86
is shown.
2: Sync signal polarity shown as P (positive) or N (negative) for [H/V].
3: Displays [Lamp time] as a measure of when the lamp should be replaced. (Cannot be used as
a counter of guaranteed lamp time.) When the displayed time approaches 2,000 hours, consult
with a store about getting a TLPLW6 replacement lamp (sold separately) prepared.
4: [Version] shows the version of the projector’s internal control program. This version is referred
to for customer service, etc.
5: In case that “------” appears for MAC address, please contact your dealer.
Note
The displayed information will not be refreshed if the status changes. To refresh the
information, dismiss the display, then display it again. The information regarding
wired LAN is refreshed every time it is displayed.
Removing a PC card
q Look at CARD indicator.
If it is off, proceed to step r.
w Press the UNMOUNT button.
Begins processing for PC card removal.
e Wait until CARD indicator goes
out.
Never remove the PC card while lit.
Doing so could damage the PC card or
corrupt your data.
r Press the Eject button.
Mounting a PC card
q Remove the slot cover.
Press lightly on the circle (“O”) while
sliding the cover in the direction of the
arrow.
w Insert the PC card.
After making sure of the card orienta-
tion, press it in firmly until it stops.
How to use the PC card slot
The wireless LAN PC card enables you to connect the projector wirelessly with a personal
computer that supports IEEE802.11b/g based wireless LAN.
p.50
(Please note that
communication between all the computers based on IEEE802.11b/g and this projector is
not guaranteed.) You can also use a commercially available memory card to project JPEG
image files using this projector.
p.58
Please follow the steps below when removing or
mounting a PC card.
Slot cover
PC Card
CARD indicator
Eject button
If CARD indicator turns red
Press the RESET switch with a thin pin or
similar implement (it is at the bottom of a
recess).
UNMOUNT button
RESET
switch
CARD indicator
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba tdp tw300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba tdp tw300 in the language / languages: English as an attachment in your email.

The manual is 6,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info