562486
60
Zoom out
Zoom in
Previous page
1/76
Next page
60
How to Use
Advanced Option
Mode Description
INPUT RESOLUTION
( For the D-SUB inputs only.)
If the monitor fails to recognize the input signal resolution correctly, you can select a proper
resolution manually. Only when a signal having a resolution close to any of the following
values from three groups, the values in the most appropriate group are selectable.
Group 1: AUTO, 1024 x 768, 1280 x 768, 1360 x 768, 1366 x 768
Group 2: AUTO, 1400 x 1050, 1680 x 1050
Group 3: AUTO, 1600 x 1200, 1920 x 1200
BLACK LEVEL
EXPANSION
(For the HDMI1-HD, HDMI2-HD, DVI-D-HD, DISPLAYPORT(YCbCr signal), OPTION
(YCbCr signal), YPbPr, S-VIDEO, and VIDEO inputs only.)
Select the level of black expansion from OFF, MIDDLE, and HIGH.
INPUT CHANGE
You can select the time for input switching from QUICK and NORMAL.
When you select QUICK, slight noise may appear.
INPUT DETECT
This function detects whether the video signals are present or not at the video inputs and
automatically select them. The priority applies when more than one signal is input at the same
time. The signal being displayed isn’t changed even when a signal with higher priority is input.
AUTO SELECT
The target video inputs are DVI-D and D-SUB. When the currently
selected input signal is lost, this function checks whether the signal is
present at the other input. When present, the other input is
automatically selected. If no signal is present at both inputs for f ve
seconds, the monitor enters the sleep mode. When an expansion
module such as the OPS BOX is in the option slot, OPTION is targeted
instead of DVI-D.The priority of the input signal is as follows:
DVI-D > D-SUB
You cannot select other inputs than DVI-D, OPTION, and
D-SUB. When an expansion module is mounted, the
monitor doesn’t enter the sleep mode.
VIDEO DETECT
The target video inputs are HDMI1, S-VIDEO, VIDEO, and D-SUB.
When the HDMI1, S-VIDEO, or VIDEO input is detected, the detected
input is automatically selected.
When the video signal being displayed is lost, the D-SUB input is
automatically selected.
The priority of the input signal is as follows:
HDMI1 > VIDEO > S-VIDEO
You cannot select HDMI2, DVI-D, OPTION, and
DISPLAYPORT. When an expansion module is mounted, the
monitor doesn’t enter the sleep mode.
OFF The video input isn’t selected automatically.
Advanced Option
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TD-Z471 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TD-Z471 in the language / languages: English as an attachment in your email.

The manual is 19,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info