562486
59
Zoom out
Zoom in
Previous page
1/76
Next page
59
How to Use
Mode Description
INFORMATION OSD
You can enable and disable the information OSD display. The display time is selectable from
3 to 10 seconds.
The information OSD display shows a message when the input source is switched,
the input signal state is changed, or the input signal has an error.
OFF TIMER
You can select the OFF TIMER mode. Select the time period to automatically turn off the
power from 1 to 24 hours.
When OFF TIMER is enabled, the SCHEDULE settings (see page 41) will be disabled.
SCHEDULE
You can program the LCD display operation schedules. (See page 42)
< HOW TO SETUP SCHEDULE >
Using the “SCHEDULE” function allows you to set up to seven different scheduled time
intervals when the LCD display will be activated.
You can select the time the monitor turns on and turns off, the day of week the monitor is
activated, and which input source the monitor will use for each scheduled activation period.
A check mark in the box next to the number of the schedule indicates that the selected
schedule is in effect.
To select which schedule to set, use the up/down arrows to move the number (1 to 7) of the
schedule.
Use the (+) and (-) buttons to move the cursor horizontally within the particular schedule.
Use the and buttons to increase the time and select the input port. The “SET” button is used
to make a selection. If you create a schedule but do not want to set the power on time, select -- in
the “ON time slot.
If you do not want to use a power off time select “-- in the “OFF” time slot.
If there is no input selected (“-- showing in the input spot) the input from the previous schedule
will be used.
The selection of EVERY DAY within a schedule takes priority over other schedules that are set up
to operate weekly.
When schedules are overlapping, scheduled Power ON time has priority over scheduled Power
OFF time.If there are two schedules programmed for the same time, then the highest numbered
schedule has priority.
When OFF TIMER is enabled, the “SCHEDULEsettings are disabled.
DATE AND TIME
You can adjust the current date and time for the internal clock. You must set this item when
using SCHEDULE. After competing the setting, be sure to press the SET button (button on
page 11). When using a button of the monitor, use the INPUT button (button on page 11).
MONITOR
INFORMATION
The model name and the serial number of your monitor are displayed.The MAC address of
LAN is displayed.
Conguration 2
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TD-Z471 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TD-Z471 in the language / languages: English as an attachment in your email.

The manual is 19,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info