497513

Toshiba RBC-AMS41E Remote control Manual

12
Zoom out
Zoom in
Previous page
1/21
Next page
Scheduled operations
11
EN
7 Set what is to be operated at the time which was
set in step 6.
* The settings can be established in any sequence.
The functions will differ depending on the model and
system.
I. Selecting and setting operation/stop
Each time the button (48) is pushed, what
appears on the timer function display changes in
the following sequence. Stop pushing the button
when the desired operation blinks on the display.
II. Selecting and setting the operation mode
Each time the button (34) is pushed, what
appears on the operation mode display (1)
changes in the following sequence. Stop pushing
the button when the operation mode blinks on the
display.
III. Setting the temperature
Each time the TEMP and buttons (49) are
pushed, what appears on the numeric display
changes in the following sequence. Stop pushing
the buttons when the target temperature to be set
blinks on the display.
IV.Setting the restriction on the button operations
• Each time the button (34) is pushed while the
button (43) is held down, the central control
display changes from off to blinking or vice versa.
To place the restriction on the button operations,
ensure that the display is blinking.
* The button (32), button (34) and
TEMP and buttons (49) are the buttons
whose operation will be restricted by this setting.
For further details, refer to the “Selecting the
remote controller functions” section.
V. Setting the save operation
Each time the button (38) is pushed, the
numeric display and save operation display
change in the following sequence. Stop pushing
the button when the desired save operation mode
(mode 0 to 3) blinks on the display.
8 Push the button (42), and enter all the items in
steps I to V above and the operation time
together.
• The display of all the setting items changes from
blinking to lighted.
9 In addition:
I. To input the settings into the different program
number for the same day of the week, repeat the
operations from step 4.
II. To move to a different day of the week and input
the program, repeat the operations from step 2.
10
Finally, push the button (46) to return to the
original screen.
• An underbar is displayed under the selected day of
the week.
Operation
continue
(No display)
Operation
stop
Operation
start
Auto
Operation mode
Heating Dry
(No display)
Fan Cooling
or
Push 4 seconds
or more
Push 4 seconds or more
Frost protection
operation
Save operation
mode
Description
Mode 0 No save operation
Mode 1 Save operation with 75% upper limit
Mode 2 Save operation with 50% upper limit
Mode 3 Compressor shutdown
Mode 0 Mode 1 Mode 2 Mode 3
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba RBC-AMS41E Remote control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba RBC-AMS41E Remote control in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info