497513

Toshiba RBC-AMS41E Remote control Manual

19
Zoom out
Zoom in
Previous page
1/21
Next page
18
Troubleshooting
Before requesting repair work
Check out the following points before requesting repair
work.
The scheduled operation is not performed even
though the set time is reached.
• The scheduled operation has not been set.
• A special holiday has been set.
The current clock time setting is blinking.
• There has been a prolonged power outage. Re-set
the current clock time and current day of the week.
There is no response when the keys are operated.
• The restriction has been set for the key operations.
Check the program.
The clock is not displayed when the power is turned
on.
• The timer operation function or follower remote
controller has been set.
• The setting for not displaying the clock has been
established.
Trouble diagnosis
<<Checks and inspections>>
• When trouble has occurred in the air conditioner, an
inspection code and the number of the indoor unit
concerned blink on the numeric display.
• Inspection codes are displayed only during operation.
• If the display has gone off, check the trouble by
following the steps in “Checking the trouble history”
below.
<<Checking the trouble history>>
• When trouble has occurred in the air conditioner, the
trouble history can be checked by following the steps
below. (Up to four events are stored in the trouble
history.)
• The trouble history can be checked whether the air
conditioner is running or shut down.
1 Push the button (42) and button (43)
together for at least 4 seconds.
• The numeric displays blink, and the servicing
display and inspect display light.
2 Push the TEMP or button (49).
• Each time one of these buttons is pushed, the
trouble history events are displayed in numerical
order.
• The “01” code on the numeric display indicates the
latest event, and “04” the earliest event.
* Do not push the button (41) since all the
trouble history events of the indoor units will be
deleted.
3 After checking the events, push the button
(43) to return to the original screen.
Concerning trouble occurring in the remote
controller
“ ”, “ ” and “ ” blink at the same time.
• This means that trouble has occurred on the remote
controller’s circuit board. Contact your dealer.
• Normal air conditioner operations are still possible, but
no scheduled operations can be performed.
<Caution> If the problem persists even after
checking out the above points, stop operating the air
conditioner, set the ground fault interrupter to off, and
give the model number and details of the symptoms to
your dealer. Do NOT attempt to remedy the
problem yourself due to the dangers involved.
Inspection code Address of indoor unit
where the trouble has
occurred
Inspection code
Address of indoor unit where
the trouble has occurred
Numerical order of
trouble history events
… 19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba RBC-AMS41E Remote control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba RBC-AMS41E Remote control in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info