497513
9
Zoom out
Zoom in
Previous page
1/21
Next page
Correct operating procedures
8
Setting the frost protection operation
1 Push the TEMP button (49) during a heating
operation.
Repeatedly push the button or hold it down until
” appears on the numeric display.
2 Now hold down the TEMP button (49) for at
least 4 seconds.
When this button is pushed, what appears on the
numeric display changes from “ to “ , and the
display lights.
The frost protection operation now starts.
Releasing the frost protection operation
1 Push the TEMP button (49) during the frost
protection operation.
When this button is pushed, the display goes
off, and what appears on the numeric display
changes from “ ” to “ ”.
A normal heating operation now starts. The
temperature setting is 18°C so push the TEMP
button (49), and select the desired temperature
setting.
The functions will differ depending on the model and
system.
During this operation, the maximum current is
restricted.
* For further details, refer to the operating instructions
of the air conditioner.
Initiating a save operation
1 During operation, push the button (38).
The save operation where the maximum current is
restricted starts, and the save operation display
lights.
2 To release the save operation, push the
button (38) again.
The save operation display goes off, and
normal operation starts.
The functions will differ depending on the model and
system.
When the air conditioner has stopped operating after
an auto (cooling), dry or cooling operation, this
function moves into action to dry out the insides of the
indoor units using the fan operation so as to keep the
indoor units clean.
* For further details, refer to the operating instructions
of the air conditioner.
1 The self-cleaning operation starts automatically
when the air conditioner was in the auto
(cooling), dry or cooling mode for at least 10
minutes before its operation is shut down.
The ON lamp goes off, the operation stop display
appears on the LCD screen, and the self-cleaning
operation display lights.
The duration of the self-cleaning operation differs
depending on the operation time prior to shutdown.
2 To stop the self-cleaning operation, push the
button (32) twice in succession.
The self-cleaning operation display goes off,
and the self-cleaning operation ends.
Save operations
Self-cleaning operations
Operation time prior to
shutdown
Duration of self-
cleaning operation
Under 10 minutes No self-cleaning
operation
10 or more minutes but
under an hour
1 hour
1 hour or more 2 hours
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba RBC-AMS41E Remote control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba RBC-AMS41E Remote control in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info