215054
21
Zoom out
Zoom in
Previous page
1/36
Next page
Using the projector and remote control
21
English
Adjust the image
Adjusting the angle height
Turn the two feet on the bottom of the projector
to adjust the image height and projection angle (see
illustration at right).
If the screen and the projector are not perpendicular to each other,
the projected image becomes distorted (trapezoidal). To correct
this problem, adjust the Keystone value in the Setup menu.
Auto-adjusting the image
When you press the Auto button on the projector, the built-in intelligent
auto-adjustment function will readjust the values of Frequency and
Clock to provide the best image quality.
The current source information will display at the bottom right cornor of
the screen for 3 seconds.
The screen will be blank while the auto-adjustment is functioning.
Fine-tuning the image size and clarity
Optimizing the image
To optimize the image, use the remote control or on-screen menus. For the operation of on-screen
menus, please refer to .
The following steps are optional. You do not need to follow every step. It depends on the image
quality you desire.
Note
• Note that a lamp characteristics may rarely cause the brightness to fluctuate slightly.
• A lamp is consumable item. If used for extended periods, images will appear dark, and the lamp
could burn out. This is characteristic of a lamp, and is not malfunction. (The lifetime of the lamp
depends on conditions of use.)
• The DMDTM is made using extremely advanced technology, but there may be black spots (pixels
that do not light) or bright spots (pixels that are constantly lit) on the panel. Please note that these
are not malfunctions.
1. Use the zoom ring to adjust the projected
image to the size you need.
2. Then sharpen the image by rotating the
focus ring.
p.26
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba mt700 dlp projector 720p at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba mt700 dlp projector 720p in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info