485545
33
Zoom out
Zoom in
Previous page
1/42
Next page
33
Adjusting picture images sent from computers
This projector automatically sets an appropriate signal processing format according to the image signal
sent from computers. However, depending on the type of the computer, the image signals may not be
projected properly. On this occasion, a countermeasure should be taken as follows:
1. Reveal the setting menu.
2. Select Setting signals by pressing ţ, ŕ buttons.
3. Press ENTER button.
The signal setting menu appears.
4. Select Auto by pressing ţ, ŕ buttons.
5. Press ENTER button.
Automatic setting is made so that an appropriate setting may be obtained for the input signal.
To cancel the menus:
6. Press MENU button.
If the computer images can not be projected properly with the above operation, adjust the images using
menus as follows:
These settings can be stored in memory of the projector.
How to adjust computer images using menus:
If the following phenomena are observed, adjust as follows:
Projected images are shifted to the left or right:Åc.
Adjust Horizontal position in the signal setting menu. Every time ? button is pressed, the projected
image is shifted to the left. Every time ? button is pressed, the projected image is shifted to the right.
Projected images are shifted up or down:Åc.
Adjust Vertical position in the signal setting menu. Every time ? button is pressed, the projected image
is shifted downward. Every time ? button is pressed, the projected image is shifted upward.
Projected images blink.
Projected images are blurred:Åc.
Adjust Fine in the signal setting menu.
A wide streak pattern appears on the projected images:Åc.
Adjust Dividing ratio in the signal setting menu.
Åú Usually, do not change the settings in the signal setting menu.
A simple method of adjusting the position of projected images
Adjusting horizontal position:
1. Align the left edge of the projected image with the left side of the screen by adjusting Horizontal
position. Then, align the right edge with the right side of the screen by adjusting Dividing ratio.
2. Repeat the above adjustments to align the horizontal position.
Adjusting vertical position:
3. Align the upper edge of the projected image with the upper side of the screen by adjusting Vertical
position.
SETTING WITH MENUS
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba MT500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba MT500 in the language / languages: English as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info