464710
35
Zoom out
Zoom in
Previous page
1/80
Next page
35
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VHS Functions
Basic Setup /
TV View Operation
1 Press [TIMER SET] to cancel the timer-standby
mode.
2 Press [TIMER PROG.].
“Timer Programming” list will appear.
3 A) To delete the timer programme:
1) Select the programme you want to delete using
[K \ L], then press [ENTER\OK].
2) Select “Delete” using [K \ L], then press
[ENTER\OK].
Confirmation window will appear.
3) Select “Yes” using [K \ L], then press [ENTER\OK].
B) To correct the timer programme:
1) Select the programme you want to correct using
[K \ L], then press [ENTER\OK].
2) Select “Programme Change” using [K \ L], then press
[ENTER\OK].
3) Correct the timer programme by using [K \ L \ 0 \ 1],
then press [ENTER\OK].
4 Press [TIMER PROG.] to exit.
5 Press [TIMER SET] to return to the timer-
standby mode.
To check the timer programming in progress
Press [TIMER PROG.].
Note
If a timer recording is proceeding, that programme is
highlighted in red. In such a case, you cannot select any
other programmes.
When you check the timer programming in progress by
pressing [TIMER PROG.] during operations of the
component (DVD or VHS) which is not currently used for the
timer recording, the programme will not be highlighted. In
this case, you cannot select other programmings.
On the front panel:
Press [STOP C].
On the remote control:
1Press [STOPC].
2 Select “Yes” using [K \ L], then press
[ENTER\OK].
The error number appears on “Timer Programming” list.
The error programme will be displayed in grey with an error
number.
The error numbers indicate:
The error programme will be deleted once you check the
error in the programme list, or once you cancel the timer-
standby mode and re-enter it.
Checking, Cancelling or Correcting the
Timer Programming Information
Stop the Timer Recording in Progress
If the Timer Programming did not
Complete Correctly
E1–E22, E37–E39 Recording error
E23–E24 Unrecordable disc
E25/E51 Copy prohibited programme
Cannot record because of the NTSC /
PAL-60 signal is received.
E26–E28 Copy prohibited programme
E29 Disc protected
E30 Disc full
E31 Already recorded 99 titles (video mode)
E32 Already recorded 99 titles (VR mode)
E33 Already recorded 999 chapters
E34 No space for Control Information
E35 PCA (Power Calibration Area) full
E36 Already finalised video format disc
E40 There are some unrecorded parts due
to the overlapped timer programmes.
Recording did not start at the start
time.
E41 Power failure
E42 No disc
E43 Already 49 titles recorded (+VR mode)
E44 Already 254 chapters recorded (+VR
mode)
E45 Copy prohibited programme
E46 It is impossible to record additionally on
a disc recorded by other units when
setting “Make Recording Compatible” to
“OFF”. (+VR mode)
1/1
E40
17/05 7:00 9:00
1 TF1
10:00 MON 17/05
Date Start End CH
Timer Programming
STTL
VPS/PDC
New Programme
E9TK5FD_EN.book Page 35 Wednesday, January 13, 2010 10:33 AM
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba DVR80KF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba DVR80KF in the language / languages: English as an attachment in your email.

The manual is 9,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba DVR80KF

Toshiba DVR80KF User Manual - German - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info