464710
34
Zoom out
Zoom in
Previous page
1/80
Next page
34
EN
5 Select the digital (DVB) / analogue (ATV) mode
or external input (AV1/AV2) using [K \ L], then
press [1].
6 Select the channel number to record using
[K \ L], then press [1].
7 Select the recording media (“DVD” or “VCR”)
using [K \ L], then press [1].
8 Select the recording mode using [K \ L], then
press [1].
Refer to “Recording Mode” on page 28 for DVD or page
70 for VHS.
Select “STTL” to “ON” or “OFF” using [K \ L].
If you set “STTL” to “ON”, subtitle will be recorded too.
When analogue channel is selected, “VPS/PDC” will be
displayed instead of “STTL”.
Select “VPS/PDC” to “ON” or “OFF” using
[K \ L].
Refer to “VPS (Video Programme System) / PDC
(Programme Delivery Control)” on this page.
When DVB channel is selected, “STTL” will be displayed
instead of “VPS/PDC”.
10 Press [ENTER\OK] when all information
required is entered.
Your programme setting is stored.
To set another programme, repeat the steps
2 to 10.
To exit, press [TIMER PROG.].
When 2 or more programmes are overlapped, “Timer
programme overlapped” appears, and the overlapped
programme will be displayed in blue. To correct the timer
programme, refer to “Checking, Cancelling or Correcting
the Timer Programming Information” on page 35.
11 Press [TIMER SET] to set a timer programming.
Front panel display stays off while the unit is in the
standby mode.
Note
If you have not set the clock, the clock setting window will
appear instead of the Timer Programming list. Continue
from “Clock Setting” on page 67 before programming the
timer.
•Use [0 \ 1] to move the cursor to the left and the right in the
entry screen for the timer programming.
If a basic recording or One-touch Timer Recording is in
progress on one component (e.g. VHS) and the timer
recording set for the other component (e.g. DVD) is about to
begin, the unit automatically switches to the programmed
channel for timer recording 2 minutes before the
programmed starting time, and the recording in progress (for
VHS) will be cancelled UNLESS their recording channels
are the same. If their recording channels are the same, the
timer recording will start without cancelling the recording
currently in progress. In this case, the recording of the same
channel will be made on both DVD and VHS.
Cancel the timer-standby mode by pressing [TIMER SET] to
use the component currently in timer-standby mode. When
finished operating, press [TIMER SET] to resume the timer-
standby mode.
In the timer-standby mode, you can turn on the power and
use the component (VHS or DVD) which is not currently
timer-programmed.
The Video Programme System (VPS) or Programme Delivery
Control (PDC) assures that the TV programmes you have
programmed for timer recording are recorded exactly from
beginning to end, even if the actual broadcasting time differs
from the scheduled time due to a delayed start or extension of
the programme duration. Furthermore, if a programme is
interrupted, the recording will also be interrupted
automatically and resumed when the programme starts again.
If the VPS/PDC signal drops out because the broadcast signal
is weak, or if a broadcasting station does not transmit a
regular VPS/PDC signal, the timer recording is performed in
normal mode (without VPS/PDC) even if it was programmed
for VPS/PDC. If the starting time of the VPS/PDC timer
recording is between 0:00 and 3:59 on a given day, the VPS/
PDC function will operate from 20:00 on the previous day to
4:00 on the next day. If the starting time of the VPS/PDC timer
recording is between 4:00 and 23:59 on a given day, the VPS/
PDC function will operate from 0:00 on the given day to 4:00
on the next day. This means that if the relevant programme is
broadcasted within this period, it is recorded correctly. If the
timer is not programmed correctly, the incorrect timer setting
stays in effect unless you cancel it. To cancel an incorrect
timer setting, refer to “Checking, Cancelling or Correcting the
Timer Programming Information” on page 35.
Note
This feature is only available for analogue channels.
9 For DVB channel recording:
For analogue channel recording:
1/1
20/05
21/05
22/05
7:00
9:00
17:00
9:00
9:30
18:00
DVB 18
DVB 190
1 TF1
0:00 MON 17/05
Timer Programming
Date Start End CH
New Programme
STTL
VPS/PDC
VPS (Video Programme System) / PDC
(Programme Delivery Control)
E9TK5FD_EN.book Page 34 Wednesday, January 13, 2010 10:33 AM
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba DVR80KF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba DVR80KF in the language / languages: English as an attachment in your email.

The manual is 9,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toshiba DVR80KF

Toshiba DVR80KF User Manual - German - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info