807536

Torqeedo Cruise 6.0 FP TorqLink Manual

81
Zoom out
Zoom in
Previous page
1/92
Next page
81
DE EN
10.4.3 Galvanic anode
NOTE! Only replace galvanic anodes in sets.
Disassembly
1
3
2
1. Loosen the galvanic anode (1) with a socket wrench SW17 and unscrew it
from the motor shaft (2).
2. Remove the O-ring (3).
3. Clean the thread of the motor shaft.
2
3
1
4. Remove the screw (1) and the galvanic anode (2).
5. Clean the contact surface (3) of the galvanic anode.
6. Repeat the process on the other side of the motor.
Installation
NOTE! Component damage due to thread locking varnish. Do not use locking
varnishes or additives.
2
1
1. First position a new O-ring (1) on the motor shaft.
2. Screw the new galvanic anode (2) onto the motor shaft and tighten it.
• Galvanic anode: 7+/- 1 Nm, 62+/- in-lbs
3
12
3. Make sure that the contact surface (1) of the galvanic anode (2) is clean and
electrically conductive.
4. Position the galvanic anode and install the screw (3)
5. Tighten the screw (3) to 3 Nm.
6. Repeat the process on the other side of the motor.
… 81 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Torqeedo Cruise 6.0 FP TorqLink at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Torqeedo Cruise 6.0 FP TorqLink in the language / languages: English, German as an attachment in your email.

The manual is 2.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Torqeedo Cruise 6.0 FP TorqLink

Torqeedo Cruise 6.0 FP TorqLink User Manual - Dutch, Danish - 92 pages

Torqeedo Cruise 6.0 FP TorqLink User Manual - French, Italian - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info