807537

Torqeedo Cruise 12.0 FP TorqLink Manual

102
Zoom out
Zoom in
Previous page
1/116
Next page
Care and service
DE EN
5. Disconnect the motor cable from the electronics box by releasing the nuts on the
connection cable (2).
6. Disconnect the shaft hose from the electronics box by pushing in the catches.
7. Pull the shaft hose and the connection cables out of the electronics box.
3
4
Fig. 56: Disassembling the motor
3M10x35 bolts 4Sealing plugs
8. Release the threaded hose connection, the shaft hose, and the threaded pipe
connection, using an M46 open-end spanner.
9. When removing, pay attention to the three O-rings between the mounting
flange and the compensator block.
10. Check that the O-rings and the surface with which these make contact are
undamaged, and replace the rings if necessary.
11. Use an M46 open-end spanner to unscrew the pipe from its threaded pipe
connection.
12. Remove sealant residue from the pipe plug.
13. Use a suitable tool (e.g. slot head screwdriver) to remove the three sealing plugs
(4).
14. Release the three M10x35 bolts (3) on the pylon.
15. Carefully pull the motor and motor cable off the mounting flange.
ADVICE
The mounting flange, which is permanently connected to the boat, remains on
the boat.
page 102 / 116
… 102 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Torqeedo Cruise 12.0 FP TorqLink at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Torqeedo Cruise 12.0 FP TorqLink in the language / languages: English, German as an attachment in your email.

The manual is 5.3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Torqeedo Cruise 12.0 FP TorqLink

Torqeedo Cruise 12.0 FP TorqLink User Manual - Dutch, Danish - 116 pages

Torqeedo Cruise 12.0 FP TorqLink User Manual - French, Italian - 116 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info