807537
101
Zoom out
Zoom in
Previous page
1/116
Next page
Care and service EN DE
8.5 Disassembling the motor
CAUTION!
Danger of injury from heavy loads!
Physical injury can result.
Do not lift the Cruise System on your own and use suitable lifting gear.
ADVICE
Damage to the battery or other electrical loads from a short circuit.
Material damage can result.
When working on the electronics box, always switch the Cruise System off at
the main switch.
Before starting work, always use a suitable test tool to confirm that the
component is not live.
ADVICE
We recommend that the Cruise 12.0 FP be installed/disassembled only by a
trained boat builder.
21
Fig. 55: Disassembling the motor
1Plugged connection for data cable 2Nuts for the connection cable
For simple disassembly of the Cruise 12.0 FP, the motor can be unscrewed from
the mounting flange. In this process, the mounting flange itself, which is typically
attached to the boat by means of sealant, remains on the boat.
1. Check that the main switch is in the “OFF” position.
2. Isolate the system from the battery.
3. Release the four screws of the electronics box in order to open it, see "Fig. 40:
Screws for electronics box".
4. Disconnect the plugged connection for the data cable (1).
page 101 / 116
101


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Torqeedo Cruise 12.0 FP TorqLink at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Torqeedo Cruise 12.0 FP TorqLink in the language / languages: English, German as an attachment in your email.

The manual is 5.3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Torqeedo Cruise 12.0 FP TorqLink

Torqeedo Cruise 12.0 FP TorqLink User Manual - Dutch, Danish - 116 pages

Torqeedo Cruise 12.0 FP TorqLink User Manual - French, Italian - 116 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info