807537

Torqeedo Cruise 12.0 FP TorqLink Manual

77
Zoom out
Zoom in
Previous page
1/116
Next page
Start-up EN DE
5.2 Installation when mounting flange is already
installed
5
6
2
3
4
1
Fig. 39: Installation of motor
1Shaft hose 4Mounting flange
2Threaded pipe connection 5M10x35 bolts
3Pipe 6Sealing plugs
1. Guide the cables through the pipe on the mounting flange (4) into the interior of
the boat.
2. Guide the pipe for the pylon through the pipe on the mounting flange.
ADVICE
Ensure that the sealing surfaces on the pipe on the pylon, the mounting
flange, and the O-rings on the pipe on the pylon remain clean, undamaged,
and well greased (e.g. with Klüber Unisilikon TK M 1012).
3. Secure the M10x35 bolts (5) using a thread fixative (e.g. Loctite 248).
4. Tighten the three M10x35 bolts (5) (37 ± 3 Nm).
5. Seal the bolt holes using the sealing plugs provided (6), in order to prevent
corrosion.
6. Press the sealing plugs (6) in until the compressed air escapes.
7. Apply a thread sealant to the thread on the pipe connection (2) (e.g. Loctite 577).
8. Screw the shaft hose onto the threaded pipe connection (2) (max. 60 ± 6 Nm).
ADVICE
The three O-rings and the surface with which they make contact, as well as
the two O-rings inside the threaded pipe connection must be undamaged,
clean, and well greased (e.g. with Klüber Unisilikon TK M 1012).
9. Turn the threaded connection for the shaft hose until the sealing ring makes
contact with the threaded pipe connection (2).
10. Twist the threaded connection for the shaft hose a quarter to a half turn further
until it is firmly seated on the threaded pipe connection (2).
11. Connect the connections to the electronics box, see Chapter 5.3, "Installation
of electronics box".
page 77 / 116
… 77 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Torqeedo Cruise 12.0 FP TorqLink at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Torqeedo Cruise 12.0 FP TorqLink in the language / languages: English, German as an attachment in your email.

The manual is 5.3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Torqeedo Cruise 12.0 FP TorqLink

Torqeedo Cruise 12.0 FP TorqLink User Manual - Dutch, Danish - 116 pages

Torqeedo Cruise 12.0 FP TorqLink User Manual - French, Italian - 116 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info