483915

Topcom T 41 - TE 6602 Manual

5
Zoom out
Zoom in
Previous page
1/32
Next page
Topcom T41 5
Topcom T41
ENGLISH
5 Buttons / connections
(See picture on folded cover page)
1. LCD display
2. Up key
3. Down key
4. Redial key
5. Delete key
6. Program key
7. Ringtone / Hold key
8. Calculator key
9. Flash key
10. Volume key
11. Dial out key
12. Handsfree key
13. Numerical keypad
14. Curl cord connection
15. Hook Switch
6 Installation
Put batteries in the battery compartment to acti-
vate the display :
• Open the battery compartment at the bottom
of the unit.
• Insert 3 Alkaline AA standard batteries.
• Close the battery compartment.
• Connect one end of the line cord to the
telephone line wall socket and the other end
to the backside of the telephone.
7 Telephone settings
7.1 Set the time and date
When you have a subscription to the caller ID
service and your telephone provider sends the
date and time together with the telephone
number, the phone’s clock will be set automatical-
ly. The year must always be set manually !
•Press
• Use / to select “
set date”
• Press to enter the settings
• Use / to change
• Press to move to the next digit
• Press to exit the menu
7.2 Set the area code
When you have a subscription to the caller ID
service it can be necessary in some countries to
enter your area code. When the telephone re-
ceives a caller ID it will remove the entered area
code from the incoming number.
• Press to enter the menu
• Use / to select “
set CODe”
• Press to enter the settings
• Use / to change
• Press to move to the next digit.
• Press to exit the menu
7.3 Set the PBX code
When your phone is connected to a PBX system
you can enter the PBX line access code.
The line access code will be added when dialling
out a number from the caller ID list.
• Press to enter the menu
• Use / to select “
pCOde”
• Press to enter the settings
• Use / to change select the digit
• Press to move to the next digit.
• Press to exit the menu
7.4 Set the operator prefix code
When you have subscribed at an alternative oper-
ator it sometimes is required to dial a prefix in front
of the telephone number.
When entering the prefix, the phone will automat-
ically add the prefix in front of the dialled number.
For example:
Operator prefix:
1234
Number to be dialled :
012345678
Number dialled by the phone:
1234012345678
• Press to enter the menu
• Use / to select “
autO 1p”
• Press to enter the settings
• Use / to select “ON” or “OFF”
•Press
• Enter the prefix
The telephone line needs to be
disconnected prior to opening the
battery door!
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom T 41 - TE 6602 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom T 41 - TE 6602 in the language / languages: English, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info