719691

Topcom RC-6405 - Twintalker Manual

7
Zoom out
Zoom in
Previous page
1/124
Next page
• If you press the button while listening to a found CTCSS
code, the PMR will go back in stand-by mode on the channel with
the CTCSS code.
• If no CTCSS code is detected there is a chance that DCS is
selected by the user. In this case you can scan for the DCS code.
(section 13.10.3)
PTT
12
8
Twintalker RC-6405
13.10.3 Scanning for a DCS code
• Press the -button
7
seven times : "SCAN" and "DCS
00"
flashes on the display for the selected radio channel.
• Press the -button
11
or the -button
10
to start the
DCS scan.
Once there is a transmission on the channel, the DCS code (if
used) will be detected and
displayed.
If you press the button while listening to a found DCS code, the
PMR will go back in stand-by mode on the channel with the DCS code.
PTT
12
13.11 Call Tones
A call tone alerts others that
you want to start talking.
13.11.1 Setting the Call Tone
The Twintalker RC-6405 has 15 call tones.
• Press the - button
7
eight times, “C” is displayed and
the current call tone is flashing.
• Press the - button
11
or the - button
10
to change to
another Call Tone.
• Press the
PTT
- button
12
to confirm and return to stand-by
mode.
13.11.2
Sending a call Tone
Press the button
6
briefly. The call tone will be transmitted on the set channel.
13.11.3 Call tone reception type
• Press the -button
7
nine times.
• Press the -button
11
or -button
10
to select the call tone reception type.
1. Tone only
2. Tone + vibration
3. Vibration only
Press the
PTT
-button
12
to confirm and return to stand-by mode.
13.12 Roger Beep On/Off
After the
PTT
-button
12
is released, the unit will send out a roger beep to confirm that you have
stopped talking.
To set the Roger Beep.
• Press the - button
7
ten times. ‘rO’ will be displayed.
• Press button
11
to enable (ON) or button
10
to disable the Roger-
Beep (OFF).
• Press the
PTT
- button
12
to confirm your selection and return to the
standby mode.
13.13 Key-Tone On/Off
When a button is pressed, the unit will beep briefly.
To set the key-tone.
• Press
button
7
eleven times. ‘tO’ will be displayed.
• Press button
11
to enable (ON) or button
10
to disable the Key
Tones (OFF).
• Press the
PTT
- button
12
to confirm your selection and return to the.
standby mode.
13.14 Dual Channel Monitor function
In stand-by, the PMR is set on one channel with CT
CSS/DCS code. The PMR will only receive
signals transmitted on that channel with the CTCSS/DCS code.
Dual Channel Monitor (DCM) allows you to monitor a second channel with CTCSS/DCS code.
• Press the -button
7
twelve times,” DCM OFF" will
flash on the display.
• Press the
-button
11
or the -button
10
to change the
channel.
• Press the
-button
7
to confirm the channel selection
and go to CTCSS selection. (Press the
-button
7
again to go to DCS selection)
• Press the
-button
11
or the -button
10
to change
the CTCSS code or DCS code.
• Press the
PTT
-button
12
to confirm and return to stand-by
mode.
• To disable the function select "OFF" when selecting the
DCM channel.
When the Dual Channel Monitor function is activated, the PMR wil
l switch sequentially between
the standby channel + CTCSS/DCS code and the Dual Channel + CTCSS/DCS code.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom RC-6405 - Twintalker at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom RC-6405 - Twintalker in the language / languages: All languages as an attachment in your email.

The manual is 50,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info