719691

Topcom RC-6405 - Twintalker Manual

6
Zoom out
Zoom in
Previous page
1/124
Next page
ENGLISH
7
Twintalker RC-6405
13.7.1 CTCSS
• Press the -button
7
twice : "CTCSS" and the current
CTCSS code flashes on the display.
• Press the
-button
11
or the -button
10
to change to
another code.
• Press the
PTT
-button
12
to confirm and return to stand-by
mode.
13.7.2
DCS
• Press the -button
7
three times : "DCS" and the
current DCS code flashes on the display.
• Press the
-button
11
or the -button
10
to change to
another code.
• Press the
PTT
-button
12
to confirm and return to stand-by
mode.
To disable CTCSS or DCS, select code "00" for CTCSS or for DCS in the
menu. When the entry is confirmed, "OF" will be displayed.
13.8 Monitor
You can use the monitor feature to check for weaker signals in the current channel.
• Press the -button
7
and -button
10
simultaneously to activate channel
monitoring.
• Press the
-button
7
to stop channel monitoring.
13.9 VOX Selection
The PMR is capable of voice activated (VOX) tra
nsmission. In VOX mode, the radio will transmit
a signal when it is activated by your voice or other sound around you. VOX operation is not
recommended if you plan to use your radio in a noisy or windy environment.
VOX mode will be overrided when you press the - button .
PTT
12
• Press the - button
7
four times, the current VOX
setting flashes on the display and the VOX icon is
displayed.
Press the •
-button
11
to set the VOX sensitivity level
between 1 and 3 (level 3 is the most sensitive level).
Press • the button
10
until ‘OFF’ appears on the display,
to turn VOX OFF.
• Press the
PTT
- button
12
to confirm and return to stand-by
mode.
13.10 Channel Scan
Channel scan performs searches for active signals in an en
dless loop from channel 1 to 8.
Once an active channel is found you have the option to search for the CTCSS code or the DCS
code that is set by the user who is broadcasting on the channel.
13.10.1 Scanning for an active radio channel
• Press the -button
7
five times : "SCAN" and the
current channel flashes on the display.
• Press the
-button
11
or the -button
10
to start the
channel scan.
Once an active channel is found, the scanning will stop and you can listen to the transmission.
When the transmission on the found channel sto
ps, the scanning will resume automatically.
If you press the button while listening to a found channel, the
PMR will go back in stand-by mode on the found channel.
PTT
12
13.10.2 Scanning for a CTCSS code
When an active channel is found press the
PTT
button
12
to select the found active channel.
Now you have to option to search for the CTCSS/DCS code that is used by the found user.
• Press the -button
7
six times : "SCAN" and "CTCSS
00"
flashes on the display for the selected radio channel.
• Press the -button
11
or the -button
10
to start the
CTCSS scan.
Once there is a transmission on the channel, th
e CTCSS code (if used) will be detected and
displayed.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom RC-6405 - Twintalker at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom RC-6405 - Twintalker in the language / languages: All languages as an attachment in your email.

The manual is 50,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info