300687

Topcom orfeo 100 Manual

19
Zoom out
Zoom in
Previous page
1/33
Next page
Orfeo 100 Orfeo 100
37
4. OPERATION
4.1. TWO ANSWERING MODES
You can register two outgoing messages: one for answering facility with
possibility to leave a message (outgoing message 1 = Announcement one) and
one for the answering facility without possibility to leave a message (outgoing
message 2 = Announcement two).
Use the On/Off button to select the desired answering mode:
A) Answering Facility With Possibility to Leave a Message
Hold down the On/Off button 1,5 sec. until the answering machine says :
“Announcement one on”.
B) Answering Facility Without Possibility to Leave a Message
Hold down the On/Off button 1,5 sec. until the answering machine says :
“Announcement two on”.
If no outgoing message was recorded, the machine will say : “Please record
announcement”.
4.2. ANSWERING MACHINE ON/OFF
The Orfeo 100 can be put on and off by pushing the On/Off button.
When you switch on the answering machine and select the answering facility
with possibility to leave a message (point 4.1), the On/Off LED will light up and
you will hear “Answering one on”.
When you switch off the answering machine, the On/Off LED will go out and you
will hear “Answer off”.
36
3.2. SETTING THE SECURITY CODE
FOR REMOTE CONTROL
For remote control you first have to introduce a security code. The code is preset
to 123. However, we advise you to program a personal security code. The securi-
ty code must contain three digits. The symbols * and # are not accepted. You can
check the setting by pressing the Code button. The machine will say the set
security code. You can only hear the security code at the machine itself,
not during remote control.
Proceed as follows to change the security code:
1. Press the Code button 1,5 sec. until the machine says the first digit of the set
security code.
2. Press the Fast Forward button to select a higher digit or the Rewind button to
select a lower digit until you have reached the right digit. Each time you press
one of these buttons, the machine says which digit you have just selected.
3. Press the Code button to set the digit you have selected as the first digit of
your personal security code. Now the machine will say the second digit of the
security code to which it is set.
4. Press the Fast Forward button to select a higher digit or the Rewind button to
select a lower digit. Each time you press one of these buttons, the machine
says which digit you have just selected.
5. Press the Code button to set the digit you have selected as the second digit of
your personal security code. Now the machine will say the third digit of the
security code to which it is set.
6. Press the Fast Forward button to select a higher digit or the Rewind button to
select a lower digit. Each time you press one of these buttons, the machine
says which digit you have just selected.
7. Press the Code button to set the digit you have selected as the third digit of
your personal security code. The machine will repeat the security code you
have just set.
Remark : If during code setting no button is pressed for one minute, the
machine will automatically leave the setting mode and return to the
previous mode.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom orfeo 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom orfeo 100 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info