299689

Topcom nelson Manual

19
Zoom out
Zoom in
Previous page
1/31
Next page
33
Nelson
32
Nelson
Wall Mounting
The NELSON can be used as a table model or can be wall mounted. Use screws to
fix the base set to the wall. Fix the screws one above the other with an interme-
diate distance of 9,8 cm into the wall. Place the openings in the underside of the
base unit over the screws and slide it down.
In order to be able to hang the handset in
the baseset (in case of wall mounting), turn
the hook downwards. Now you can hang
the handset on the hook of the baseset.
Electrical Connection
Connect the small plug to the baseset (3) and plug the adapter in a 220 V wall
outlet.
Telephone Network Connection
Plug one end of the telephone line cord into the appropriate jack in the back of
the telephone (4) and the other end of the telephone line cord into the house tele-
phone jack or in a telephone exchange.
Attaching the Belt Clip
The belt clip is quickly and easy to attach: slide down the clip on the handset.
Insert the belt clip in the guide slots and slide it up.
Battery Charging
Before you can make a telephone call, the battery of the handset needs to be
charged. Full battery charging takes about 15 hours. Place the handset in the con-
nected baseset for charging. The red battery indicator ( 8 ) lights up. After 15
hours the battery is completely charged and the phone is fully operational.
Note:
• Faulty batteries are small chemical waste and should be treated as such, never
throw them away with the rest of the household waste.
• Remove the battery from the handset when you leave for a long time and you
isolate the power supply.
• When you have not charged the battery in the handset for a long time, charge
the battery at least over night before use.
Tone and Pulse Dialling
If your telephone company offers a Touch Tone dialling system, set the Tone/
Pulse selector switch (5) on the baseset in Tone position. If your telephone com-
pany offers the older mechanic dialling system, set the selector switch in Pulse
position.
If you are unsure which system you are connected to, set the selector switch in
the Tone position. Lift the handset. When you hear a dial tone, dial a telephone
number. If the connection is not made, move the selector switch to the Pulse
position and try again.
Baseset Ringer Volume
Set the ringer switch of the baseset (6) in HI or LO position. If you do not want to
be disturbed by the telephone ringing, set the ringer switch in the OFF position.
Handset ON/OFF
Make sure the unit is switched ON. At the bottom of the handset (between the
battery charger contacts), there is a switch (21) to turn the handset ON (I) and OFF
(O). Use a pointed object (biro, etc.) to adjust the switch if necessary.
Delayed Ringing
When the handset is not in its base, the handset will start ringing with a delay
because first the radio contact between base and handset must be established.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom nelson at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom nelson in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info