462250

Topcom Diablo 150 Manual

15
Zoom out
Zoom in
Previous page
1/72
Next page
Topcom Diablo 150/Twin/Triple/Quattro 15
Even if the answ ering machine is Off, it will automatically pick up after 10 rings to enable remote activation (§ 7.4)
7.2.2 Setting Number of Rings
The number of ring s after which the answering machine will answer calls can be set from
2 – 9 and TS (Toll saver). The standard setting is 6 rings. In Toll saver mode, the machine will answer after 6 rings if there are no new
messages, and after 2 rings if there are new messages. If there are no ne
w messages and you call your machine to check your messages
remotely (§ 7.4), you can hang up after the 2nd ring. You do not need to pay connection fees and you know that you do not have any new
messages.
To check the actual number of rings, press the ‘*’-key twice. A voice will playback the current number of rings.
Press the ‘*’ key follow
ed by the ‘#’-key to set the number of ringing tones. Enter the number of ring you want (2-9) or press ‘1’ for Toll saver.
7.2.3 Day setting
Press ‘0’ followed by ‘*’ to hear the actual day.
Press ‘0’ followed by ‘#’ to set the day. Enter the day ‘1= Sunday, 2= Monday...7= Saturday’
If the day is correctly entered, the unit will anounce the new setting.
7.2.4 Memory Full
If the memory is full, the a nswering ON/OFF icon will flash on the display rapidly (0,5 sec.
ON/OFF). If the answering machine is turned On and a call comes in, the machine will automatically play OGM 2 (answering machine
function without recorded caller message).
When listening to the messages, the internal voice will announce that the memory is full and then play b
ack the messages.
Erase some or all the messages after listening to them.The memory is free again.
7.2.5 Programming the security Code
The security code is a 3-digit code used to operate the machine remotely (§ 7.4). The security code is set to '123' by default. You can hear
the current security code by entering ‘9’ followed by the ‘#’-key.
To set a new security code press ‘9’ + ‘*’. Enter the new code (3 digits) after the tone and confirm with the ‘#’-key.
7.2.6 Recording and selecting a Outgoing message
Press ‘8’ to enter the outgoing message menu. The following options are available:
‘1’ To hear main menu
‘2’To play current set OGM
‘3’ To record OGM 1
‘4’ To record OGM 2
‘5’ To select OGM 1
‘6’ To select OGM2
‘8’ To hear OGM menu again
7.3 Operation
If a call is received and the answering machine is turned ON, the answering machine will automatically answer the call after the set number
of rings. If outgoing message 1 has been selected, the message will be played, a beep will be heard and the caller can leave a message
(max. 3 minutes). If outgoing mess
age 2 has been selected, after the beep, the line will automatically be disconnected. The caller doesn’t
have the possibility to leave a message.
Note: If, during pick-up, nothing is said for 8 seconds, the line will be automatically disconnected.
7.3.1 Call screening
This function is convenient if you only want to answer certain calls. During incoming call it is possible to screen the call and hear who is
calling . You can hear the outgoing message and the caller who is leaving a message by pressing the Answering machine key....
7.3.2 Recording a Memo
A memo is considered as an incoming message that can be picked up later by the user. The max. recording time for a memo is 3 minutes.
Press the Answering machine key and . Start speaking after the tone and press ‘#’ to stop the recording.
7.3.3 Playback of Incoming Messages and Memos
Press the Answering machine key to enter the Answering mode.
Press to play all the messages and memos.
Press to play only the new messages and mem os.
For each message, the internal voice announce the day and time when the message was recorded.
During playback, you can:
Go to the beginning of the current message by pressing once.
Go to the previous mess
age by pressing twice.
Interrupt playback by pressing . Press again to restart playback.
Go to the next message by pressing .
7.3.4 Deleting Messages
a. Deleting one by one during playback
Start message playback as explained above.
During playback of the message to be erased starts, press Ø.
The machine will start playing the next message.
b. Deleting all messages
After you have listened to all messages, the internal voice will ask you to delete all the messages.
Press Ø to confirm. After pressing delete, the interna
l voice confirms that all the messages have been deleted.
7.4 Remote operation
The answering machine can be operated remotely using a touch-tone phone (DTMF tone selection system).
The remote control is menu operated.
7.4.1 To enter the remote operation
•Call your machine.
•The answering machine picks up the line, you hear the outgoing message and a beep.
• After the beep, press ‘*’ long. The unit will ask to enter the VIP code.
• Slowly dial the Security code (default 123).
•If the Security code is incorrect, the unit will confirm and ask you to re-enter. If the Security code is correct and the unit has new
messages, it will start to pronounce the amount of new mess
ages an also play them. When all messages are played, the unit will ask
you to press ‘5’ to delete current played messages, or ‘1’ to hear main menu.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom Diablo 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom Diablo 150 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info