Manual Topcom Diablo 150 (page 14 of 72) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

462250

Zoom out

Zoom in

1/72

14 Topcom Diablo 150/Twin/Triple/Quattro

External ring volume/melody

Î Internal ring volume/melody Î Date/time setting Î

Dial mode setting Î Flash time setting Î Base ring volume/melody

5.7.1 Handset External/Internal melody and volume

Press and hold the Program button until the icon starts to flash. Î Press the Program button again, the external melody is heard

and the EXT-icon is flashing.

Î Select the desired melody (1-5) by entering a number (1 - 5). Î Use the scroll keys to select

the desired volume (Off or 1-5)

Î Press again to confirm the setting and to go to internal melody and volume (same as above).

5.7.2 Date time setting

DD-MM HH:MM (DD= day, MM=month, HH=houre and MM=minutes)

Enter the date and time using the number key. The flashing cursor can be moved by the scroll keys .

Î Press again to confirm

the setting and to go to the next setting below.

5.7.3 Setting the Dial mode

There are two types of dialling mode: - 1 - DTMF/Tone dialling (the most common) (default) OR - 2 - Pulse dialling (for older installations)

Press ‘1’ or ‘2’ and press again to confirm the setting and to go to the next setting below.

5.7.4 Setting the Flash time

There are two flash times: - 1 - 100ms OR - 2 - 250 ms

Press ‘1’ or ‘2’ and press again to confirm the setting and to go to the next setting below.

5.7.5 Base melody and volume

The base ringer is heard. Î Select the desired melody (1-5) by entering a number (1 - 5). Î Use the scroll keys to select the

desired volume (Off or 1-5)

Î Press again to confirm the setting and to go back to standby.

5.8 Keypad lock

When the keypad is locked, pressing any key will have no effect during standby (except holding the key). Press and hold the key. Î

appears on the display and the keypad is locked. Î Press twice the key again to un-lock the keypad.

5.9 Turning handset ON/OFF

Press and hold to turn off. Press for 2 seconds to turn back ON.

6Caller-ID function (Display the telephone number of incoming calls)

This function is only possible if you are subscribed to a telephone operator that provides this service. When you receive a call, the numbers

are saved in a Call list. This list can hold 10 telephone numbers (each of max. 20 digits). When you’ve received a new unanswered call,

the CLIP symbol will blink on the display.

6.1 Consulting the Call list

Press the Call Log button . The last received call is shown on the display. If the list is empty, ‘----------’ is shown on the display. For

answered calls the -icon appears and unanswered calls the -icon appears

Î Press the program key to show the other digits

(if longer then 12) or to show the date and time.

Î Use the scroll keys to scroll to the previous call. When you reach the top or

bottom of the list an error tone will be sounded

Î You can leave the Call list by pressing the on-hook button. You can dial out the

number by pressing the Off-hook button .

7 Answering machine

The Diablo has a built-in digital answering machine with a recording capacity of 11 min. The answering machine can be operated from the

handset and remotely. It features the possibility of recording two outgoing messages (OGM 1 and OGM 2) (maximum of 3 min).

There are 2 possibilities:

• With OGM 1, the caller has the possibility to leave a message

•With OGM 2, only the outgoing message is given without the caller having the opportunity to leave a message

An internal voice will state various information, such as day and time of the call, as well as settings such as Security code, ringer tones,...

The language of the internal voice is depending from the country sold (English or German).

The max. recording tim

e for each incoming message = 2 min.

7.1 Display

The TAM icon will appear when the answering machine is turned ON. It’s starts flashing if new messages have been received

(regardless of the answering ON/OFF mode). If the answering machine is switched Off, the icon will not appear.

The icon will flash fast if the internal memory is full and no new messages can be recorded.

When entering the answering machine mode (see below) the display will show the following if:

•If no new messages are received: ‘- - - - - - - - - - - -’ and a flashing -icon.

•If new messages are received the unit will start playing the messages and show ‘ -NN- -MM- ‘. NN = total of messages and MM=

number is message currenctly pla

yed.

7.2 Entering the Answering controle mode

To start operating the answering machine you have to press the answering machine key . If you have new messages the messages

will be played to the handset. If all new messages are played the new messages can be deleted if is pressed within 8 seconds of the

end of the last message.

To leave the answering controle mode, press the -key again. In no instruction is received for 8 seconds, the unit shall return to idle.

Following functions are available under each numerical key:

‘1’ To hear main menu

‘2’ Play all messages

‘3’ Play new messages

‘4’ Skip back during message playback

‘5’ Deleting messages

‘6’ Skip forward durin

g messgage playback

‘7’ Set answer On or Off

‘8’Hear the outgoing message menu

‘9’ To set the security code

‘0’ To set the day

‘*’ Set the answering delay

‘#’ To record a memo

7.2.1 Turning Answering Machine On/Off

If the answering machine is On, the -Icon appear on the display in standby (or blink when there are new messages) and the machine

will automatically pick up the line after a number of rings (§ 7.2.2 ). To turn it On or Off, press ‘7’.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Topcom Diablo 150 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Topcom Diablo 150 Manual

Product: