299670

Topcom deskmaster 125 Manual

25
Zoom out
Zoom in
Previous page
1/34
Next page
Deskmaster 125
Deskmaster 125
48
5.9. MEMORY FULL
If the memory is full, “Fu” appears on the display. If a third OGM is registered the
answering machine automatically switches to “Answering mode without possibil-
ity to leave a message”.
If no third OGM is registered the answering machine will only answer after 10
rings. You can command your answering machine by remote control and erase
messages.
Only if you have emptied the memory by erasing messages, your answering
machine will switch back to “Answering mode with possibility to leave a mes-
sage”.
5.10. BATTERY
In case of a power failure, the answering machine is inoperative. The battery
saves the registered messages and settings. After the power failure has been
restored, your answering machine will operate as before again.
The battery can only save the registered messages and settings for a couple of
hours. If power failure lasts longer, these data will be lost and afterwards the
answering machine will switch to “Answering mode with possibility to leave a
message” with default OGM.
The answering machine is equipped with a detector which emits a warning sig-
nal when the battery is almost empty. In the latter case the selected OGM will
flash (An 1, An 2 or An 3 ). When the battery is still enough charged, the OGM is
lit permanently.
47
cally a pause during playback. You can resume message playback by pressing “1”.
6. After all messages have been played back, you will hear: “End of messages”.
7. You have 10 seconds to activate another feature.
e.g. Press “0” to erase all messages. You will hear: “All messages erased”.
8. To end remote control, press “3” or hang up.
CHANGING OGM BY REMOTE CONTROL
1. Dial your telephone number.
2. After a few rings your machine will answer your call and emit the OGM. Press
# to stop OGM playback.
3. Enter your security code.
4. As soon as you hear the waiting signal, press “7”. You will hear: “Please record
announcement”.
5. After the beep tone, say your new OGM.
6. When you have finished your new OGM, press “7” again.
7. The machine will play back your new OGM automatically for checking.
8. Press “3” or hang up if your new OGM is OK.
5.8. REMOTE CONTROL MENU
1. Dial your telephone number.
2. After a few rings your machine will answer your call and emit the OGM.
Press “ # ” to stop OGM playback
3. Enter your security code
4. Press “2” , you will hear all possible remote control commands.
5. After the menu, enter a number to start a function or press “3” to stop.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom deskmaster 125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom deskmaster 125 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info