299654

Topcom cleo Manual

21
Zoom out
Zoom in
Previous page
1/35
Next page
37
Cleo
Storing Indirect Numbers
Ten additional numbers can be stored in memory and retrieved using the AUTO but-
ton
(10) and the numbers on the keypad.
1. Pick up the handset and wait for the dial tone.
2. Press and release the STORE button
(12).
3. Dial the telephone number to be stored. If it is a long distance number, be sure
to add the international code and the land code, followed by the area code (with-
out 0) and the subscriber’s number. If it is a local number, simply dial the digits
of the subscriber’s number, without the area code.
4. Press and release the STORE button
(12).
5. Press the button on the keypad in which you want to store the number. If you
select button “5” the number will be stored in memory location 5 of the keypad.
6. Return the handset to the cradle.
Repeat steps 1 to 6 to store other telephone numbers in other memory locations.
Note: In case you want to change a number that was stored in a certain memory
location, simply repeat the above steps from 1 to 6 to store a new number. The old
number will automatically be replaced by the new number.
Dialling Indirect Numbers
1. Pick up the handset and wait for the dial tone.
2. Press the AUTO button
(10) then press the memory location number in which
the telephone number you want to dial is stored. The unit will automatically dial
the number stored in the memory button you selected.
Cleo
FLASH Button (14)
With the FLASH button (14) you can put through a conversation by means of an
interruption of the line, provided that the telephone is connected to a PABX switch-
board.
MEMOR Y
Storing a Telephone Number
This telephone can store up to 13 telephone numbers. Each of the memory number
locations can store up to a maximum of 15 digits. The numbers can be stored in
either tone or pulse mode.
Storing Direct Numbers
The M1, M2 and M3 buttons (25) are direct memory locations for the numbers you
use the most.
1. Pick up the handset and wait for the dial tone.
2. Press and release the STORE button
(12).
3. Dial the telephone number to be stored.
4. Press and release the STORE button
(12) again.
5. Press the memory button (M1, M2 or M3)
(25) under which you want to store the
number.
6. Replace the handset in its cradle.
Dialling Direct Numbers
1. Pick up the handset and wait for the dial tone.
2. Press the direct memory button M1, M2 or M3
(25) in which the telephone num-
ber you want to dial is stored. The unit will dial the number automatically.
36
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom cleo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom cleo in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info