462233
6
Zoom out
Zoom in
Previous page
1/88
Next page
6 Topcom Butler S100
Topcom Butler S100
6.4 Setting the speaker ON/OFF
If you only want to use the blinking LED (visual indicator) and not the speaker, turn the
speaker switch to the left; = OFF.
6.5 Setting the ring tone
Press the tone button repeatedly until the desired ring tone is heard (1-9). The ring tone
will be stored automatically until you press the tone button again.
7 Troubleshooting
8 Technical Data
Range (base depending): up to 300 m in open space
up to 50 m in buildings
Batteries: 3 x 1.2V, 2200 mAh AA Type NiMH rechargeable
Max. standby time: approx. 400 hours
Ring sound: 85dBA max.
Ambient temperature: +5 °C to +45 °C
Permitted relative air humidity: 25 to 85 %
Power supply adapter: 220/230V, 50 Hz
6VDC 300mA
Problem Possible cause Solution
Green LED blinking Out of range
Not registered
Put the unit closer to the base
Make sure the unit is registered
on a DECT base
Ringer volume too low or no
ring sound
Selected ring tone not
ideal
Speaker switched OFF
Adjust the ringer tone, some
tones are clearly hearable then
others, the volume cannot be set!
Make sure the speaker switch is
turned ON
Cannot register Base has no free
handset anymore
Base system pin is not
‘0000’ or ‘1111’
Base is not in
registration mode
Remove one registered handset
from the base
Make sure the system pin of your
base is set to ‘0000’ or ‘1111’
See you base/telephone manual
how to put it into registration
mode
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom Butler S100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom Butler S100 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info