Manual Topcom Butler S100 (page 5 of 88) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

462233

Zoom out

Zoom in

1/88

Topcom Butler S100 5

Topcom Butler S100

ENGLISH

4 Battery low indication

When the batteries are low the LED’s start to blink 3 times every 5 seconds. When the battery

are completely empty, the unit no longer carries out operations. We advise you to charge the

unit for 12 hrs so that it can be recharged completely.

5 First use

The Butler S100 is a visual ringing amplifier which can be used in large or noisy places. Or

used by people who has a hearing problem. When there is an incoming call the Butler S100

will flash and if the speaker is turned ON it will loudly ring. (With a sound level of 85dBA max.)

The Butler S100 is a receiver only and the transmitter is the DECT telephone base station.

Before you can use it, it must be registered on the base.

6 Operation

6.1 Register to a base

Before you can register the Butler S100 on to a DECT base, the base station must be put in

registration mode and the system PIN code must be ‘0000’ or ‘1111’. Also the base must

have one handset free to register. Please consult you base station/telephone manual how to

put it into registration/subscription mode and how to set the system pin code to ‘0000’ or

‘1111’!

• Make sure the Butler S100 is turned ON (see ’6.2 Turning the unit ON or OFF’).

• Put the base station into registration mode (see manual of your DECT base/telephone).

• Press and hold the tone key for 10 seconds.

• A beep will be heard when the speaker is turned ON and the LED will start to blink.

• During 1 minute the Butler S100 will search for a base which is in registration mode. If

it’s found it will try to register with pin code = ‘0000’ if it doesn’t succeed it will try again

with pin code =‘1111’.

• If it’s registered the blinking will stop and a long confirmation beep will sound (if the

speaker is turned ON).

• If it’s not registered there will be an error beep (two short beeps).

6.2 Turning the unit ON or OFF

To turn the unit ON, switch the ON/OFF key to the right.

To turn the unit OFF, switch the ON/OFF key to the left.

6.3 Incoming calls

When a call comes in, the unit LED’s will flash and if the speaker is turned ON it will also ring.

It will stop when the other side of the line hangs up (base stops ringing) or when the line is

taken by one of the handset.

It can only work if you have already a DECT GAP base station/telephone!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Topcom Butler S100 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Topcom Butler S100 Manual

Product: