462225
22
Zoom out
Zoom in
Previous page
1/116
Next page
22 Topcom Butler 4450/Twin/Triple/Quattro
Topcom Butler 4450/Twin/Triple/Quattro
Even if the answering machine is Off, it will automatically pick up after 10 rings to enable
remote activation (see 7.3 “Remote Operation” on page 25)
7.1.3 Setting Number of Rings
The number of rings after which the answering machine will answer calls can be set from
2 – 9 and TS (Toll saver). The standard setting is 6 rings. In Toll saver mode, the machine
will answer after 6 rings if there are no new messages, and after 2 rings if there are new
messages. If there are no new messages and you call your machine to check your messages
remotely (see 7.3 “Remote Operation” on page 25), you can hang up after the 2nd ring. You
do not need to pay connection fees and you know that you do not have any new messages.
To set the number of ring by the base:
To check the actual number of rings, briefly press the ‘skip forward’ button. A voice will
playback the current number of rings.
Press for 2 secs to set the number of ringing tones.
Press immediately to change the current number of rings.
If you do not press any keys for 3 seconds, the machine will set the selected number of
rings.
To set the number of rings by the handset:
1. Enter the menu by pressing /OK
2. Select TAM SETTINGS using the up and down keys
3. Press OK
4. Select ANS DELAY using the up and down keys and press OK
5. Set the number of rings using the up and down keys and press OK to confirm.
7.1.4 Memory Full
If the memory is full, the answering ON/OFF LED will flash on the base rapidly (0,5 sec.
ON/OFF). If the answering machine is turned On and a call comes in, the machine will
automatically play OGM 2 (answering machine function without recorded caller message).
When listening to the messages, the internal voice will announce that the memory is full and
then play back the messages.
Erase some or all the messages after listening to them.The memory is free again.
7.1.5 Programming the VIP Code
The VIP code is a 3-digit code used to operate the machine remotely (see 7.3 “Remote
Operation” on page 25). The VIP code is set to '123' by default.
1. Enter the menu by pressing /OK
2. Select TAM SETTINGS using the up and down keys
3. Press OK
4. Select REMOTE CODE and press OK
5. Enter the new code and press OK to confirm
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom BUTLER 4450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom BUTLER 4450 in the language / languages: German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info