299622

Topcom butler 131 Manual

22
Zoom out
Zoom in
Previous page
1/33
Next page
40 41
• The LCD display will show “Clear All”.
• Press the Set button again to confirm to clear all memories.
• The following settings are changed:
1 Redial memory is erased
2 All phone number memories are erased
3 The Flash time is set to default as flash 100ms
4 All PABX codes are erased
6.16 Paging/Find
6.16.1 Paging
• In standby mode, press and release the Page/Find button on the base unit.
• A paging tone will now be emitted in the base and handset buzzer.
6.16.2 Find
• In standby, press and hold the Page/Find button for 2 seconds on the base
unit, until you hear the beep tone.
• A repeating page tone will now be generated in the base and handset buzzer.
• The repeating page signal sounds for 30 seconds and then turns off auto-
matically.
• To cancel the repeating page signal, press and release the Page/Find button on
the base station again or press any button on the handset.
6.17 Low battery warning
If battery low is detected during a conversation, a low battery warning tone will be
generated every 5 sec and the Battery symbol will flash continuously on the display.
Put your handset in charging position on the base unit to charge the battery,
otherwise after a short time also the display will be switched off.
6.18 Call barring
6.18.1 Activate call barring
• Press the Set button to go to the Set menu.
• Press “7”. The actual setting appears on the display.
• Press “1” to activate call barring, press “2” to deactivate call barring.
• The setting appears on the display, together with the Call Barring symbol.
• Press the Set button again to confirm the new setting.
• This function will be automatically activated when the buttons are not being
pushed for 10 seconds.
6.18.2 Deactivate call barring
To deactivate call barring, press the buttons “4” and “9”.
As soon as the phone starts ringing, or the Paging button is being pressed, the
keypad will be automatically deactivated.
7 INDICATION CALLER (CALLER-ID)
(only Butler 136)
The Butler 136 has the function “CALLER-ID” which means that, when a call
comes in, the caller’s telephone number is visible on the display, before answering
the call. This is only possible when this service is being offered by your telephone
provider and when this service is activated. Contact your telephone provider for
more information.
7.1 Operation
When the phone receives a phone call, the caller’s number is visible on the display.
The display can only show 9 digits. If the number has more than 9 digits (max.20)
you can look at the 2nd part of the number by pressing “3”.
E v e ry received telephone number will be stored in de Caller-ID List which can be
checked when the phone is in standby mode.
7.2 CALLER-ID list
The Caller-ID list maintains the last 12 incoming calls. If the list contains 12 num-
bers and a new call comes in, the oldest call will be erased automatically and the
new call will be stored. Therefore we recommend you to regularly check and
erase the Caller-ID list.
If the Caller-ID List has received new calls, the symbol “ “ appears on the
display.
7.2.1Indication “total number of calls” and “new calls”
• Press the Set button to go to the Set menu.
• Press now the Paging button to go to the Caller-ID List.
• The display will show the total number of calls and the number of new calls
- tot = total number of calls in the Caller-ID List
- ne = number of new calls
7.2.2 CALLER-ID list scroll
After indication of the total number of calls and the number of new calls (as
mentioned above), you can go to the last call by pressing “1” (top of the list) or
go to ‘previous calls’ by pressing “2”.
Butler 131/136 Butler 131/136
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom butler 131 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom butler 131 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info