Manual Topcom butler 131 (page 23 of 33) (English, German, Dutch, French)

299622

Zoom out

Zoom in

1/33

42 43

Remark

• When you are at the top of the list (last call), “head of list” is shown. Press “2” to go

back.

• When you are at the beginning of the list (oldest call), “tail of list” is shown. Press “1”

to go down.

• If the number has more than 9 digits, press “3” to see the rest of the number.

7.2.3 To erase a stored number

When you want to erase a number from the Caller-ID List, press and hold the

number “8” for about 1 second. The number will be erased from the Caller-ID

List.

7.2.4 To erase the entire list

It is possible to erase all the calls from the Caller-ID List that have already been

read (no new, nor unread calls). Erasing the calls is only possible when the total

number and new calls is shown on the display.

• Press the Set button in standby mode to go to the Set menu.

• Press the Paging button and the total number and the new calls are shown on

the display.

• Press and hold “8” for 1 second and the phone asks your confirmation to

erase the calls.

• Press “8” again to confirm or press another button to stop the phone from

erasing the calls.

• After having erased the calls, only the number of new calls is shown on the

display.

8 TROUBLESHOOTING

The handset does not ring

• Are the batteries charged ? (check if the display is working)

• Perhaps the handset is programmed not to ring (see 6.5.1 Ring volume of

handset)

The display does not function

• Check if the batteries are connected well.

• Check if the battery charger contacts are not damaged or dirty.

Indicators on the base station do not function

• Check if the adaptor and the telephone plug have been connected in the

c o r rect socket on the bottom of the base station.

• Check the power supply of the adaptor.

• Check if the delivered adaptor has been used.

Bad connection

• The handset is too far away from the base station, move closer.

You hear an intermittent beep during the conversation

• You are too far away from the base station, if you do not move closer to the

base station within 10 seconds, the conversation will be broken.

• Possibly the 15 minutes conversation timer is activated. Press a numerical

button (0-9) to continue the conversation.

• When the battery symbol appears on the display of the handset or the low

battery indicator lights, the battery needs to be charged.

9 SETTINGS

Clear all memory. Clears the following memories :

1 x

• Erases redial memory

• All phone number memories

• Flash time is set as flash 100ms

• Erases all PABX codes

R function programming

2 x

x= 1 : /

x= 2 : flash 100 ms

x= 3 : flash 115 ms

x= 4 : flash 270 ms

x= 5 : flash 600 ms

PABX access code

3 x y z

x= 1 : PABX group 1

x= 2 : PABX group 2

x= 3 : PABX group 3

y= 1 : 3 seconds pause (1P)

y= 2 : 7 seconds pause (2P)

z= PABX access code (max 2 digits)

Key tone

4 x

X=1 : Key tone ON

X=2 : Key tone OFF

Butler 131/136 Butler 131/136

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Topcom butler 131 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Topcom butler 131 Manual

Product: