Manual Topcom Babyviewer 4500 - KS 4245 (page 7 of 85) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

484006

Zoom out

Zoom in

1/85

Babyviewer KS-4245

ENGLISH

12.3 Registering the parent unit with the baby unit

– Switch the baby unit off.

– Cover the light sensor with a black cloth and switch the

baby unit on. The Power LED on the baby unit flashes

quickly for approximately 15 seconds.

– With the parent unit switched on, press and hold the play

button for a few seconds.

– An icon appears in the display.

– Press the menu button to confirm the selection.

– “C1 ….” Appears initially, then “C1 …. OK”. When a

connection is established, the image viewed by the lens

appears in the display.

13 Storage and disposal instructions

13.1 Storage

Remove the batteries (regular or rechargeable) from the parent

unit and the baby unit.

Store the equipment in a dry location.

13.2 Waste disposal of package materials

The package materials are environmentally friendly

materials that can be given to your local waste collector

for recycling.

13.3 Waste disposal (environmental protection)

Dispose of the equipment in accordance with the

provisions of European Directive 2002/96/EC, Waste

Electrical and Electronic Equipment (WEEE),

regarding discarded electrical and electronic

equipment. Contact your municipal waste disposal

department for information.

Dispose of batteries (regular or rechargeable) in an

environmentally friendly manner in accordance with local

regulations.

14 Technical data

15 EC conformity declaration

Tristar hereby declares that this device is in compliance with the

essential requirements and other relevant provisions of Directive

1999/5/EC.

The declaration of conformity can be found at www.tristar.eu

16 Tristar warranty

16.1 Warranty period

The Tristar units have a 24-month warranty period. The warranty

period starts on the day the new unit is purchased. There is no

warranty on standard or rechargeable batteries (AA/AAA type).

Consumable or defects causing a negligible effect on operation or

value of the equipment are not covered. The warranty has to be

proven by presentation of the original or copy of the purchase

receipt, on which the date of purchase and the unit-model are

indicated.

16.2 Warranty exclusions

Damage or defects caused by incorrect treatment or operation

and damage resulting from use of non-original parts or

accessories are not covered by the warranty. The warranty does

not cover damage caused by outside factors, such as lightning,

water and fire, nor any damage caused during transportation. No

warranty can be claimed if the serial number on the units has been

changed, removed or rendered illegible. Any warranty claims will

be invalid if the unit has been repaired, altered or modified by the

buyer.

16.3 LCD defect policy

Despite the highest possible standards, the intricate

manufacturing of liquid crystal display (LCD) screens may still

produce slight visual imperfections. However, there will be

provided a warranty service for your Babyviewer LCD screen if

there are:

– 3 bright dots or 5 dark dots or 8 bright and/or dark dots in total; or

– 2 adjacent bright dots or 2 adjacent dark dots; or

– 3 bright and/or dark dots inside an area of 15mm diameter

These TFT LCD screen warranty conditions are offered by the

LCD manufacturers. Therefore, at its option, the

product will be repaired or replaced.

Please note: A bright dot is a white or sub-pixel that is always on.

A dark dot is a black or sub-pixel that is always off.

If “C1 …. X” appears (registration failed), it may

be necessary to remove the batteries from the

baby unit for a few seconds before trying again.

We recommend that you keep the box and

packing materials so you can use them to

transport the equipment in the future if necessary.

Frequency 2,4GHz

Range Outdoors: up to 300 m (Line of

sight)

Indoors: up to 50 m

Operating temperature 0°C to 40°C

20% to 75% relative humidity

Parent unit

Display 3,5” (8,8 cm) TFT LCD

Rechargeable batteries Included battery pack:

– SKL BL-50C

– Li-ion

– 3,7V 1100 mAh

AC mains adapter Manufacturer: G. Credit

Model: 5E-AD060080-E

Input: 100~240V AC, 50/60Hz,

0,2A Max

Output: 6 V DC / 800 mA

Dimensions approx. 137 x 84 x 60 mm

Weight 125 g (without rechargeable

batteries)

Baby unit

Image sensor Colour CMOS

Lens f 4.4mm, F 3.0

Night vision 4 Infrared LED

Batteries 4 Alkaline cells (LR03/AAA) (not

included)

AC mains adapter Manufacturer: G.Credit

Model: 5E-AD060080-E

Input: 100~240V AC, 50/60Hz,

0,2A Max

Output: 6 V DC / 800 mA

Dimensions approx. 86 x 100 x 125 mm

Weight 132 g (without batteries)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Topcom Babyviewer 4500 - KS 4245 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 69,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Topcom Babyviewer 4500 - KS 4245 Manual

Product: