Manual Topcom BABYTALKER 3500 (page 7 of 196) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

531049

Zoom out

Zoom in

1/196

Babytalker 3500 SEDS

ENGLISH

– Repeatedly press button until ‘Language’ is displayed.

– Press button . The current language is displayed.

– Repeatedly press button or until the desired language is displayed.

– Press button to confirm the language.

– Press button to exit the menu.

9.3 Checking the Link Between the Parent Unit and the Baby Unit

You should always check the wireless link when you use the babyphone for the first time.

– Put the parent unit in the same room as the baby unit, separated by at least two metres.

– Switch on both devices. The parent unit will try to establish a connection with the baby unit.

– The green Link LED on the parent unit blinks while it is trying to establish a connection.

The LED stays on continuously after a connection has been established.

– The sounds picked up by the microphone are reproduced by the parent unit.

– The volume of the reproduced sound is indicated by the volume LEDs at the top of the parent unit.

The higher the volume, the more LEDs are on.

– An audible tone is generated when the maximum volume is reached.

– If no connection is established, a double beep tone is generated as a warning and the Link LED blinks.

– Reduce the distance between the parent and baby units until a new connection is established.

9.4 Finding the Parent Unit (Paging function)

– Press the Paging button on the baby unit and hold it pressed for at least 2 seconds before releasing

it.

– In response, the parent unit will emit a high-pitched tone for 30 seconds. This makes it easier to find the

parent unit.

– Briefly press the On /Off switch on the parent unit to switch off the tone.

9.5 SEDS Switch Setting

The Babytalker 3500 SEDS is based on the unique Smart ECO Distance Switch

(SEDS) technology, which lets parents set the radiated power of the equipment. There

are two choices: ‘long distance mode’ or ‘ECO’ mode with reduced power consumption

and lower radiation.

Set switch to:

– ‘LONG’ for a maximum range of 600 m (free space).

– ‘ECO’ to reduce the radiated power by half and reduce power consumption. With this setting, the range is

reduced to a maximum of 300 m (free space).

9.6 Talking With Your Baby

You can use the babyphone to talk with your baby.

– Press the Talk button on the parent unit and hold it pressed.

– Hold the parent unit vertical with the microphone approximately 10 cm from your mouth, and speak into

the microphone.

– Release button when you have finished talking.

9.7 Playing a Lullaby

There are three pre-programmed lullabies that you can play on the baby unit.

You can configure lullaby playback on the parent unit (see “9.8.5 Setting the Lullaby”) or on the baby unit.

– To play the currently selected lullaby or stop playback, press button on the baby unit.

– To select a different lullaby, repeatedly press button until the desired lullaby is displayed.

9.8 Settings

9.8.1 Setting the Reproduction Volume of the Parent Unit

There are six volume settings. The lowest setting is ‘Volume Off’.

– Press button to increase the volume.

– Press button to decrease the volume.

• Allow your baby to get used to the talk function before you use it in practice.

SEDS

LONG

ECO

PTT

Babytalker 3500 SEDS D106.book Page 7 Tuesday, November 10, 2009 1:16 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Topcom BABYTALKER 3500 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Topcom BABYTALKER 3500 Manual

Product: