531049

Topcom BABYTALKER 3500 Manual

6
Zoom out
Zoom in
Previous page
1/196
Next page
Babytalker 3500 SEDS
6
– Fit three AA alkaline cells (LR06/Mignon) in the battery compartment.
Ensure that the polarity is correct.
– Close the battery compartment.
8.3 Connecting the Baby Unit to the AC Mains
Insert the small plug of the AC mains adapter in the mains power
connector of the baby unit and plug the AC mains adapter into a
mains connector (230 V / 50 Hz).
8.4 Installing Rechargeable Batteries in the Parent Unit
See Figure on the fold-out page.
– Rotate the belt clip upward.
– Turn the screw on the cover of the battery compartment at the back
of the parent unit 90° counterclockwise and remove the battery
compartment cover.
– Place the NiMH battery pack in the battery compartment.
Ensure that the tab of the battery pack fits in the corresponding recess
and that the polarity matches the figure (B).
– Carefully close the battery compartment and rotate the belt clip back
downward.
8.5 Installing Rechargeable Batteries in the Parent Unit
– Insert the small plug of the AC mains adapter in the mains power connector of the charging station and
plug the AC mains adapter into a mains connector (230 V / 50 Hz).
– Place the parent unit in the charging station. The red Charging LED will go on.
9 Operation and Use
9.1 Switching the Baby Unit and Parent Unit On and Off
– Press the On/Off switch to switch on the parent unit. The display is activated.
– Press the On/Off switch to switch on the baby unit. The display is activated.
– Press the On/Off switch to switch off the parent unit (press and hold until the display goes blank).
– Press the On/Off switch to switch off the baby unit (press and hold until the display goes blank).
9.2 Setting the Display Language
– Press button . ‘Night light’is displayed.
• Never mix used cells with fresh cells.
CAUTION
• The mains connector must be within easy reach so you can
quickly unplug the power cable in an emergency.
• Use only the supplied AC mains adapter (6 V DC / 300 mA).
CAUTION
• Use only the supplied NiMH battery pack in the parent unit.
• Do not turn the screw past the ‘Open’ point.
• It takes around 10 hours to fully charge the batteries.
• The parent unit will try to establish a connection with the baby unit. If the Link LED goes
on, a connection has been established. If it does not, see page 12.
SEDS
LONG
ECO
6V/300mA
+
+
+
+
-
AA x 1
+
-
AA
x
1
+
-
A
A
x
1
SEDS
LONG
ECO
6V/300mA
14
B
+
AB
30
31
32
33
29
22
12
3
21
29
12
23
Babytalker 3500 SEDS D106.book Page 6 Tuesday, November 10, 2009 1:16 PM
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom BABYTALKER 3500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom BABYTALKER 3500 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info