484003
9
Zoom out
Zoom in
Previous page
1/72
Next page
7
Babytalker 3100
ENGLISH
The sounds picked up by the microphone are reproduced by the parent unit.
The volume of the reproduced sound is indicated by the volume LEDs at the top of the parent unit.
The higher the volume, the more LEDs are on.
An audible tone is generated when the maximum volume is reached.
If no connection is established, a double beep tone is generated as a warning and the Link LED blinks.
Reduce the distance between the parent and baby units until a new connection is established.
9.3 Finding the Parent Unit (Paging function)
Press the Paging button on the baby unit and hold it pressed for at least 2 seconds before releasing
it.
In response, the parent unit will emit a high-pitched tone for 30 seconds. This makes it easier to find the
parent unit.
Briefly press the On /Off switch on the parent unit to switch off the tone.
9.4 NEMo Switch Setting
The Babytalker 3100 is based on the unique NEMo technology, which lets parents set
the radiated power of the equipment. See “6.4 No emission mode (NEMo)”.
If you want to have a quicker response you can turn the NEMo function OFF. By turn
OFF the NEMo function you will have always communication between the baby-and parent unit (even when there
is no noise).
To turn it ON/OFF:
Turn off both parent- and baby unit.
Slide the switch to ON or OFF at the back of baby unit.
Power up both units (no need to concern which unit first)
9.5 Setting the Reproduction Volume of the Parent Unit
There are six volume settings.
Press button to increase the volume.
Press button to decrease the volume.
When you set the volume at the lowest setting the speaker will be turned off. Only the volume LED’s will lit when
noise is captured by the baby unit.
9.6 Switching the Night Light On and Off
You can switch the night light on and off directly on the baby unit by pressing button .
10 Cleaning and Maintenance
This section contains important instructions for cleaning and maintaining the equipment.
Follow these instructions to ensure trouble-free use and prevent damage to the equipment due to improper
maintenance.
10.1 Safety Instructions
If NEMo is turned ON and the baby unit picks up noise, it will take
about 3 seconds before the parent unit will turn on the speaker.
If volume is turned off and maximum volume is captures by the baby unit, you will hear a
short beep to indicate this.
DANGER
Risk of fatal injury due to electric shock!
Before cleaning the equipment, switch it off and unplug the power cable from the mains receptacle.
CAUTION
Risk due to leaking battery fluid
Fluid from leaking batteries (regular or rechargeable) can cause injuries (skin irritation) or damage to the
equipment. Wear safety gloves.
CAUTION
6
11
13
5
15
NEMO
OFF
ON
10
26
28
11
3
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom Babytalker 3100 - KS 4231 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom Babytalker 3100 - KS 4231 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info