531050

Topcom BABYTALKER 2000 V2 Manual

16
Zoom out
Zoom in
Previous page
1/70
Next page
BABYTALKER 2000
USER GUIDE / HANDLEIDING / MANUEL D’UTILISATEUR /
BEDIENUNGSANLEITUNG / MANUAL DE USUARIO /
BRUKSANVISNING / MANUAL DO UTILIZADOR /
UŽIVATELSKÁ PŘÍR
UČKA /
UŽÍVATEL’SKÝ MANUÁL
V1.3 - 03/11
UK The features described in this manual are published with reservation to
modifications.
NL De in deze handleiding beschreven mogelijkheden worden gepubliceerd onder
voorbehoud van wijzigingen.
F Les possibilités décrites dans ce manuel sont publiées sous réserve de
modifications.
D Die in dieser Bedienungsanleitung umschriebenen Möglichkeiten, werden
vorbehaltlich Änderungen publiziert.
ES Las características descritas en este manual pueden ser objeto de futuras
modificaciones.
S Funktionerna i denna bruksanvisning publiceras med reservation för ändringar.
PT As características descritas neste manual são publicadas sob reserva de
modificação.
CZ Možnost úpravy funkcí popsaných v této příručce vyhrazena.
SK Vlastnosti popísané v tejto príručke sú publikované s vyhradeným právom na
zmenu.
1
9
8
7
14
2
3
10
6
15
11
12
10
17
13 14 15 16
18
19
20
21
A
B
C
D
3
Topcom Babytalker 2000
ENGLISH
1 Introduction
Thanks for purchasing the Babytalker 2000. This Babyphone with digital communication
ensures that you can hear your baby clearly without any distracting noise or interference.
2 Safety Instructions
WARNING:
• This baby monitor is compliant to all relevant st
andards regarding electromagnetic fields
and is, when handled as described in the user guide, safe to use. Therefore, always
read the user guide instructions carefully before using the device.
• Adult assembly required. Keep small parts away from children when assembling.
• This product is not a toy. Do not allow children to play with it.
• This baby monitor is not a substitute for responsible adult supervision.
• Keep this User's Manual for future reference.
• Do not place the baby unit or cables in the crib or within the arm re
ach of the baby (at
least 1 meter away).
• Secure the cords away from babies reach.
• Do not cover the baby monitor with a towel or blanket.
• Never use extension cords with the enclosed AC adapters.
• Test the monitor before use. Get familia
r with the functionallity.
• Do not use the monitor near water.
• Do not install the monitor on heat sources.
• Only use the chargers and power adapters supp
lied. Do not use other chargers or
power adapters, as this may damage the device and battery cells.
• Only insert batteries of the same type. Never use ordinary, non-rechargeable batteries,
in the parent unit. Insert batteries so they connect to the right poles (indicated in the
battery compartment).
• Do not touch the charger or plug contacts with sharp or metal objects.
3 Description
See folded cover page
3.1 Parent Unit (Illustration A and B)
1. Volume indicator LED’s
2. On/Off button
3. Link indicator LED
4. Speaker
5. Desktop charger
6. Charging LED
7. Power LED
8. Volume down button
9. Volume up button
10. Belt Clip
11. Battery cover screw
12. Battery cover
4 Topcom Babytalker 2000
Topcom Babaytalker 2000
3.2 Baby unit (Illustrations C and D)
13. Night Light button
14. On/Off button
15. Paging button
16. Power LED
17. Night Light
18. Microphone
19. Hang handle
20. Battery cover screw
21. Battery cover
4 Getting started
4.1 Baby unit battery Installation
The baby unit can be used either with 3 AA - Size batteries (alkaline batteries recommended)
or the household AC current. The Baby unit has no charging function!
It is recommended to add the batteries. It will automatic
backup when there is a main power
interruption.
+
+
+
+
-
AA x 1
+
-
AA
x
1
+
-
AA x 1
90° MAX
1. Turn the screw 90° of the battery cover (20) on the backside of the baby unit in a counter
clockwise direction using a screw driver. Remove the battery cover (21). Do not try to
rotate the screw further than the position ‘open’.
2. Install 3 AA alkaline batteries following the polarity as shown.
3. Close the battery compartiment.
4. Press the On/Off button (14). Th
e power (16) LED will illuminate.
5. Press and hold the On/Off button (14) to switch off the baby unit.
Do not mix old batteries with new ones.
Keep batteries away from small children
Do not short-circuit & dispose of in fire.
Remove the batteries if this device is not going to be used for a long period.
5
Topcom Babytalker 2000
ENGLISH
4.2 Baby unit power supply
1. Connect the small plug of the AC adaptor to the power connector of the baby unit and
the other end of the adapter cable to the electric socket (230V/50Hz).
Only use the enclosed adapter (6V DC / 500mA).
2. Press the On/Off button (14). Th
e power (16) LED will illuminate.
3. Press and hold the On/Off button (14) to switch off the baby unit.
4.3
+
-
+
-
Parent unit battery Installation
1. Turn the belt clip facing upwards.
2. Turn the screw 90° of the battery cover (11) on the backside of
the
parent unit in a counter clockwise direction using a screw
driver. Remove the battery cover (12). Do not try to rotate the
screw further than the position ‘open’.
3. Install the enclosed 2 AAA rechargeable batteries following
the
polarity as shown.
Do not install alkaline batteries!
4. Close the battery compartiment.
5. Press the On/Off button (2). The power LED (7) will illuminate.
6. Press and hold the On/Off button (2) to switch off the parent unit.
4.4 Parent unit power supply
1. Connect the power adapter cable to the main
power socket (230V/50Hz).
Only use the enclosed adapter
(7V DC / 420mA).
2. Slide the Parent Unit into the charger. The red
ch
arging light illuminates.
3. It takes about 13 hours to charge the unit.
4. Press the On/Off button (2). The power LED (7)
w
ill illuminate.
5. Press and hold the On/Off button (2) to switch off the patent unit.
When the battery level is low, the power LED (7) will blink.
6 Topcom Babytalker 2000
Topcom Babaytalker 2000
4.5 Link
Do not place the baby unit or cables in the crib or within the arm reach of the baby
(at least 1 meter away).
When using the Babytalker the first time, it is adviced to test the connection.
• Install the parent unit in the same room as the baby unit, but have at least 1 meter
between the 2 units.
• When both units are switched on, the parent unit will search for the baby unit.
• The green link LED on Parent Units will flash until they communicate. Once the link is
established, the LED will light continously.
• The voice captured by the microphone will be audible on the parent unit.
• The level of the detected speech is represented by the LED’s on top of the parent unit.
• When the speech reached the maximum level, a beep will be audible.
• When the connection is established, move the parent unit to the monitor room, but within
the operation range.
• When there is no connection, an alert signal (double beep) will be audible (out of range
warning) and the green connection LED will blink.
• Move the parent unit closer until the link is re-established.
5 Using the Babytalker 2000
5.1 Volume adjustment
There are 5 volume levels on the parent unit.
• Press the volume up button to increase the volume level.
• Press the volume down button to decrease the volume level.
5.2 Night Light
• Press the Night Light button on the baby unit. The night light (17) will illuminate.
• Press the Night Light button again to switch the light off.
5.3 Sound alert
The babies voice detection level is indicated by the number of volume indicator LED’s (1) on
top of the display.
Only when the volume of the parent unit is set to ‘Off’, a beep can inform you when the voice
level reached the red led zone.
5.4 Paging
When your parent unit is lost, you can track it by pressing the paging button on the baby unit
for 2 seconds.
The parent unit will emit a high beep tone for 30 seconds which helps you to find it very
easiliy.
Press the on/off button briefly to stop the beep.
7
Topcom Babytalker 2000
ENGLISH
6 Registration
When the baby unit night lights are flashing and/or no communication can be established
between the baby- and parent unit (the green link LED on the parent unit will flash), the parent
unit needs to be registrated to the baby unit.
6.1 Registration
• When baby unit is in power off state, press and hold the On/Off button on the baby unit,
while connecting the power adaptor.
• The baby unit will power on and enter registration mode.
• Release the On/Off button. Under baby unit
registration mode, the night light will flash
for 60 seconds.
• During registration mode, press and hold the On/Off button on the parent unit while
inserting charged batteries.
• The parent unit will power on and 3 red volume indicator LED’s will flash.
• If the registration is success, the baby unit night light will stop flashing and exit
re
gistration mode.
• The 3 red volume indicator LED’s on the parent unit will go out and exit registration
mo
de with confirmation tone (1 long beep).
• If the registration is unsuccesful or the registration
mode time is elapsed, the baby unit
night light will stop flashing and exit registration mode.
• The 3 red volume indicator LED’s on the parent unit indication will go out and exit
re
gistration mode with an error tone (3 short beeps).
• Retry the procedure.
To verify the linkage between pa
rent unit and baby unit:
• Pressing the paging button on the baby unit for 2 seconds.
• The parent unit will emit a high beep tone for 30 seconds.
• Press any button on the parent
unit briefly to stop the beep.
7 Disposal of the device (environment)
At the end of the product lifecycle, you should not throw this product into the normal
household garbage but bring the product to a collection point for the recycling of
electrical and electronic equipments. The symbol on the product, user guide and/or
box indicate this.
Some of the product materials can be
re-used if you bring them to a recycling point. By re-
using some parts or raw materials from used products you make an important contribution to
the protection of the environment.
Please contact your local authorities in case you ne
ed more information on the collection
points in your area.
8 Cleaning
Clean the babytalker with a slightly damp cloth or with an anti-static cloth. Never use cleaning
agents or abrasive solvents.
This product is in compliance with the essential requirements and other
relevant provisions of the the R&TTE directive.
The Declaration of conformity can be found on:
http://www.topcom.net/cedeclarations.php
8 Topcom Babytalker 2000
Topcom Babaytalker 2000
9 Specifications
Frequency
Maximum range
Power supply
Batteries
1.880 GHz -to 1.900 Ghz
Outdoor : up to 300 m - Indoor : up to 50 m
Parent unit charger :7V / 420mA DC
Baby unit : 6V / 500mA DC
Parent unit : 1,2V x 2 AAA rechargeable batteries
Baby unit : 3 x AA Alkaline batteries (no charging function)
10 Topcom warranty
10.1 Warranty period
The Topcom units have a 24-month warranty period. The warranty period starts on the day
the new unit is purchased. The warranty on batteries is limited to 6 months after purchase.
Consumables or defects causing a negligible effect on operation or value of the equipment
are not covered.
The warranty has to be proven by presentation o
f the original purchase receipt, on which the
date of purchase and the unit-model are indicated.
10.2 Warranty handling
A faulty unit needs to be returned to a Topcom service centre including a valid purchase note.
If the unit develops a fault during the warranty period, Topcom or its officially appointed
service centre will repair any defects caused by material or manufacturing faults free of
charge. Topcom will at its discretion fulfil its warranty obligations by either repairing or
exchanging the faulty units or parts of the faulty units. In case of replacement, colour and
model can be different from the original purchased unit. The initial purchase date shall
determine the start of the warranty period. The warranty period is not extended if the unit is
exchanged or repaired by Topcom or its appointed service centres.
10.3 Warranty exclusions
Damage or defects caused by incorrect treatment or operation and damage resulting from
use of non-original parts or accessories not recommended by Topcom are not covered by
the warranty.
Topcom cordless phones are designed to work with rechargeable batteries only. The
da
mage caused by the use of non-rechargeable batteries is not covered under warranty.
The warranty does not cover damage caused by o
utside factors, such as lightning, water and
fire, nor any damage caused during transportation. No warranty can be claimed if the serial
number on the units has been changed, removed or rendered illegible.
Any warranty claims will be invalid if the unit h
as been repaired, altered or modified by the
buyer or by unqualified, non-officially appointed Topcom service centres.
14 Topcom Babytalker 2000
Topcom Babytalker 2000
7 Afvoeren van het toestel (milieu)
Na afloop van de levenscyclus van het product mag u het product niet met het
normale huishoudelijke afval weggooien, maar moet u het naar een inzamelpunt
voor recycling van elektrische en elektronische apparatuur brengen. Dit wordt
aangeduid door het symbool op het product, in de handleiding en/of op de
verpakking.
Sommige materialen waaruit het product is vervaardigd kunnen worden hergebruikt als u ze
na
ar een inzamelpunt brengt. Door onderdelen of grondstoffen van gebruikte producten te
hergebruiken, levert u een belangrijke bijdrage tot de bescherming van het milieu.
Wend u tot de plaatselijke overheid voor meer informatie over de inzamelpunten bij u in de
bu
urt.
8 Reinigen
Reinig de babyfoon met een licht vochtige doek of met een antistatische doek. Gebruik nooit
reinigingsmiddelen of schurende oplosmiddelen.
Dit product voldoet aan de basiseisen en andere relevante bepalingen
van de R&TTE-richtlijn.
De verklaring van overeenstemming treft u aan op:
http://www.topcom.net/cedeclarations.php
9 Specificaties
Frequentie
Maximumbereik
Voeding:
Batterijen
1880 GHz tot 1900 GHz
Buiten: maximum 300 m
Binnen: maximum 50 m
Oplader ontvanger: 7 VDC/420 mA
Zender: 6 VDC/500 mA
Ontvanger: 1,2 V x 2 oplaadbare AAA-batterijen
Zender: 3 x AA-alkalinebatterijen (geen laadfunctie)
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom BABYTALKER 2000 V2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom BABYTALKER 2000 V2 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 4,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info