Program setting
”P1-P36” is system program setting key, only used under time countdown mode, setting time
window shines, press ‘ +’ ‘-’ to adjust the setting status, press ‘MODE’ to return to the default
status, time window shines when in setting status , initial time: 30 minutes, setting range:
5:00—99:00. Press speed ’+’ ‘-’ key to adjust the setting status.
1. In P1-P36, the speed and slope of each program is divided into 16 segments；
2. A chirp will sound when switching between segments；
3. When the motor is running, press the start key, the motor stops running, the variou
s
parameters remain unchanged；
4. Press the start key again, and the tempo will run at the speed in the automatic program
；
5. Set the time to zero, the speed slowly reduced until the stop, the middle window shows
End, the buzzer to alarm;
6. Pull off the safety key to stop the motor running, the time window displays "E07", and the
buzzer will sound a short alarm.
BODY FAT FUNCTION
when the treadmill is stopped, press the "PROG"key until select” FAT "and enter into body
fat
function, then press “MODE” key to set the parameter.
A)
F1
means Sex, the 1(male), 2(female). If the window display 1, which shows you,
selects
"Male", the original is Male
B)
F2
, means Age, the range is 1-99, and the original is 25.
C)
F3
, means Height, the range is 100-220CM(39-87inch), the original is 170CM(67inch)
D)
F4
, means Weight, the range is 20-150KG(44-330bound),the original is 70KG(154bound)
E)
F5
, mean BMI, show you enter into body fat function. Put two hands on the handle bar,
wait for 8 seconds, and the window will show the BMI. Take the Asian people for example,
BMI
under 18 is under weight;
Between 18 and 24 is normal weight;
Between 25and 28 is over weight;
And over 29 is
obesity.
Metric-Inch interconversion function:
6.1
Pull out the safety key and press the “PROGRAM” key and “MODE” key at the same
time, LED displays “M”, it changes kilometers into miles.
6.2
Pull out the safety key and press the “PROGRAM” key and “MODE” key at the same
time, LED displays “KM”, it changes miles into kilometers.
HRC Program:
1) HRC defaults to three parts, HRC1 limits the speed of 9 km / h, HRC2 limits the speed of 11
km/h, HRC3 is limited to 13 km/h
