737802
16
Zoom out
Zoom in
Previous page
1/25
Next page
COMPUTER INSTRUCTIONS
17
- Display range: 0 ~ 999 cals.
- Display flashing “100” for presetting CALORIES (countdown) program. The target calories value can be
set from 10 to 999 cals.
- The cal/hour is the average calories consumed per hour during the workout.
CYCLE &
WATTS:
- Display only in INTERVAL program.
- Display flashing “8” for presetting the target rounds of exercise in INTERVAL program. The target cycle
value can be set from 1 to 99 rounds.
- Display range: 0 ~ 999 watts.
- Display the amount of power generated at any moment during the workout.
LOW BATTERY REMINDER:
- Display battery symbol only when the battery is low.
PROGRAMS
The Console Monitor has eight programs: QUICK START, TIME (countdown), DISTANCE (countdown),
CALORIES (countdown), GAME, and INTERVAL PROGRAMS of 20/10, 10/20, & 10/10.
Press “Select” to change workout program according to the following sequence: Quick Start à Distance à
Time à Calories à Game à 20/10 Interval à 10/20Interval à 10/10 User Setting Interval
1. QUICK START PROGRAM
- To Quick Start the program, you can pull on the Handlebar(3) to start. All function values for the
console will count up.
- Press “STOP” button once to temporarily stop counting all values (Pause function). Pull the Handlebar
(3) again to continue the counting. Long press “STOPbutton to delete all counting data
.
- For Quick Start and all three countdown programs, pressSELECT” button to choose the data
displayed in the same display window, including Time & Time/500m AVG.
- For the other seven programs, press “BACK” button to enter IDLE mode. Or press and hold
ENTER/STOP” button for over 3 seconds to re-start the console. Use “SELECTbutton to toggle
between programs. Use “UPand DOWN” buttons to adjust the value and press “ENTER/STOPto
confirm.
2. DISTANCE (Countdown) PROGRAM
- During the workout, the DISTANCE” program will count down from preset value.
- The program will start once the user pulls the Handle (44). When the program is finished, the monitor
will show “WINNER” with an audible alarm. Press the “BACK button to go to the IDLE mode.
3. TIME (Countdown) PROGRAM
- During the workout, the TIME” program will count down from preset value. The program will start once
the user pulls the Handle (44). When the program is finished, the monitor will end with an audible alarm.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toorx SKX Ski Cross -Standalone at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toorx SKX Ski Cross -Standalone in the language / languages: English as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toorx SKX Ski Cross -Standalone

Toorx SKX Ski Cross -Standalone User Manual - German - 25 pages

Toorx SKX Ski Cross -Standalone User Manual - French - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info